37
5
Num
Flag
Object
Function
Length
DPT
Function
Description
2201
2216
Objects of Timer 2 to Timer 8, please refer to descriptions of those objects in Timer 1
Objects of Effect 2 to Effect 16, please refer to descriptions of object Effect 1
[Timer 1]
Percentage
[Effect 1]
Start/Stop
percentage
(DPT5.001)
start/stop
(DPT1.010)
1 byte
1 bit
CRT
CW
0 - 100%
0 = Stop;
1 = Start
This object is used
to send dimming
value signals of the
timer when it is
triggered. This
object only
available when the
object Addition
object is set at
percentage.
Activate or
deactivates the
Effect.
Note: This object is
only valid when the
parameter “Effect
function” is checked.
38
6.ETS Parameters
6
6.1 General
The ETS parameters of the device are distributed across different
parameter pages. To simplify the overview, only the parameter pages
of the device selected in the function tree are displayed.
Seven parameter pages are available under the heading
“General“, General setting, A:ECGs enable, A:Groups enable,
B:ECGs enable, B:Groups enable, Timer enable and Effects enable.
The parameters are described below.
