89
6
Decide whether to repeat
the effect functions or not.
Use this parameter to
activate the function.
Effect Repeating
Effect n function
n = [1, 16]
Once an effect function is activated, a new page Effects will appear.
At this subpage, the further parameterization can be done. Detailed
information is described in the following section.
●
Unchecked
●
Checked
Unchecked
●
Unchecked
●
Checked
Unchecked
Dynamic range
[
]
default value
[
]
default value
ETS-text
Comment
6 5
. .1 Effect
In addition to light scenes the gateway also enables the use of
effects. An effect is essentially the process control of light
values of different groups and individual ECGs. The individual
light values can either be directly controlled or dimmed via a
dim value. 64 effect steps can be programmed by an effect
function. An effect step can also be programmed as a delay.
90
6
Choose which segment,
group or ECG to work with
this effect.
Choose which ECG or
group to work with this
Use this parameter to set a
desired value.
Defines the time needed to
achieve the required
setting.
Time count before setting
to the dimming value after
the effect is triggered.
Channel
ECG/Group
Value
Fade time
Delay
●
no use
● Dali A ECG
● Dali A group
● Dali B ECG
● Dali B group
no use
●
–
1 64 (ECG)
1 16 (group)
●
–
0 -100%
[0%]
Immediately, 0.7s,
1.0s, …64s, 90.5s
[2.0s]
0 – 255s
[0s]
Dynamic range
[default value]
The chart shows the dynamic range for this parameter:
ETS-text
Comment
The following chart shows the objects that belong to general
setting:
Number
2216
1 bit
[Effect 1]
Start/Stop
Name
Length
Usage
Activate or deactivates
the Effect.
Note: This object is only
valid when the
parameter “Effect
function” is checked.
