ENGINEERING RECORD
NO :
XXXXXX
SAP NO :
1807981000
Doc No:
1807981000
Doc part:
AS
REV-
A
http://www.molexces.com
MPN/FMT-042 (2019/DEC/23 REV-03).
THIS INFORMATION IS CORRECT AS AT THE TIME OF PUBLICATION, SPECIFICATION ARE SUBJECT TO CHANGE. SHEET No.
1
of
2
INSTALLATION INSTRUCTIONS
BEFORE INSTALLING OR ADJUSTING THIS PRODUCT,
PLEASE READ THESE INSTRUCTIONS CAREFULLY.
PLEASE KEEP THIS GUIDE FOR FUTURE REFERENCE
CORESYNC POWER OVER ETHERNET GATEWAY UNREGULATED 2.0 90W
1.0
SCOPE
THIS DOCUMENT WILL PROVIDE INSTALLATION INSTRUCTIONS OF
CORESYNC POWER OVER ETHERNET
GATEWAYUNREGULATED 2.0 90W
2.0
PRODUCT DESCRIPTION
CORESYNC POWER OVER ETHERNET GATEWAY UNREGULATED 2.0 90W
(1807981000),
Conforms to UL 2108
standard – Certified to CAN/CSA standard C22.2 NO. 250.0
3.0
CAUTION AND WARNING:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
GATEWAY MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN. (CHECK WITH LOCAL AND
NATIONAL CODES FOR PROPER INSTALLATION).
RISK OF ELECTRIC SHOCK. DO NOT HANDLE ENERGIZED GATEWAY WITH WET HANDS OR WHEN
STANDING ON WET OR DAMP SURFACES.
OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE GATEWAYS.
USE ONLY WITH CLASS 2 POWER UNIT
– 60VDC MAXIMUM.
WARRANTY VOIDED IF GATEWAY HAS BEEN MODIFIED FROM ITS ORIGINAL CONFIGURATION.
DO NOT USE OUTDOORS.
SUITABLE FOR DAMP LOCATIONS.
4.0
PROCEDURES
Step 1.
Refer the below mounting pattern as shown below to mount the Gateway 2.0.
Step 2.
Snap in the wire harness male connector into the female connector as shown below to connect to the
Core Sync bus as shown below.
