Technical Manual Presence Detector SCN-P/G360XX.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
51
51
4.10 Temperature
Only for Glass-Presence detectors: SCN-G360D3.02, SCN-G360K3.02
The following picture shows the available settings:
Figure 30: Settings - Temperature measurement
The temperature measurement can be used to measure the temperature in the room and send it to
the bus. The temperature can be sent to the bus either at an adjustable change or cyclically (at fixed
intervals).
The measured temperature can be shifted up or down using the "Correction value for sensor"
parameter..
The following table shows the available communication object:
Number
Name
Length
Usage
110
Temperature
–
Measured
value
2 Byte
Sending the measured value
Table 29: Communication object - Temperature measurement
