MDT Technologies SCN-G360D3.02, Техническое руководство

Страница: 19 / 57

Technical Manual Presence Detector SCN-P/G360XX.02
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• knx@mdt.de • www.mdt.de
19
19
By activating "Lock object ON", the light channel sends the output value ON and remains in the ON
state until the locking process is deactivated..
The following table shows the corresponding communication objects:
Number Name Length Usage
6 Lock object 1 Bit Locking the light channel
6 Force control object 2 Bit Activate/deactivate force control
7 Lock object ON 1 Bit Switching on the light channel and locking the
light channel in the ON state
Table 6: Communication objects - Force control/lock object
Attention: If the value is "On" when the output is locked, the set follow-up time runs again when the
lock is released before the channel switches off!
4.2.5 Output object
The following figure shows the settings for the output object:
Figure 10: Settings - Output object
Die nachfolgende Tabelle zeigt die möglichen Einstellungen für diese Parameter:
ETS-Text
Dynamic range
[Default value]
Comment
Object type for output
–
Light

Switching

Dimming

Scene
Selection of the object type which is
sent when a movement is detected
Table 7: Settings - Output object
The parameter "Object type for output" defines the data point type of the output object.
Output object: Switching
If the object type "Switching" is selected, a separate object for night operation can be displayed. For
example, the main light can be switched on in day mode and a small orientation light can be
switched on in night mode.