McNeilus 1487747, Операция, обслуживание и запчасти, Страница: 62 / 75

Extreme 9" Monitor/DVR System © 2014 McNeilus Truck and Manufacturing, Inc.
58
Preco Preview Radar System
PreView
®
Single Sensor System for P/N 1504244
(For Rear Loader Application Only)
READ AND UNDERSTAND THESE INSTALLATION INSTRUCTIONS BEFORE INSTALLING THE PRECO
PREVIEW RADAR SYSTEM.
Follow all Lockout/Tagout instructions during installation of the Preco PreView System and its equipment.
McNeilus Kit Number 1504244
Item Part Number Description Qty.
1 1504304
Sensor for Rear Loader Application Only 1
1-1/4" x 10-24 Bolts 4
1-1/4" x 10-24 Locking Hex Nuts 4
1-1/4" x 10-24 Flat Washers 4
Sensor Drill Template 1
2 1483927
VideoLink 1
1/4-20 x 1-1/2" Cap Screws 2
1/4" x 1-1/2" Screw 2
1/4" x 1-1/2" Flat Washers 2
1/4-20 Nylock Nuts 2
3 1483944 Buzzer Kit (24V buzzer, red and black wire, terminals) 1
4 1504310 Body Cable, 35' (10.6 M) 1
5 1483928 Cab Adaptor Cable, 16' (4.9 M) 1
6 1483926 Monitor Adaptor/ Cable, 59" (1500 mm) 1
7 1504305 Sensor Guard Bracket 1
8 1504300 Sensor Bracket, Adjustable 1
Installation Instructions
•
Mount the Single PreView
®
Sensor
1. Select a location for the sensor that is on the rear of the vehicle,
centered, and toward the top of the truck using the appropriate
sensor bracket (see Figure 33).
• Make sure the sensor is mounted perpendicular to the ground with
the "PreView" logo readable (see Figure 33).
• A sensor guard bracket (P/N 1504305) will help prevent any
damage to the sensor when the rear loader is loading dumpsters
and/or utilizing the cable.
• Either bolt or weld the brackets on the truck.
Sensor Guard
Bracket
Preco Sensor
and Bracket
Figure 33
Before permanently mounting the sensor to the
vehicle, ensure it provides a clear detection zone.
In the proposed location, temporarily attach the
sensor and turn the system on to verify nothing is
detected in the zone. Reposition the sensor in
another location until nothing is detected in the zone.
IMPORTANT