McNeilus 1487747, Операция, обслуживание и запчасти, Страница: 22 / 75

Extreme 9" Monitor/DVR System © 2014 McNeilus Truck and Manufacturing, Inc.
18
Main Menu Functions
•
Rear Grid Setting - option to set up the distance
grid on the monitor in distance increments of feet
or meters (Figure 7).
Unit - measurement in either feet or meters
for the Grid.
Figure 7: Rear Grid Setting Menu and grid settings for a camera.
Distance Grid on Monitor for Reverse Camera
Distance grid function is only available if selecting the single
camera configuration.
To access the Grid function, enter the OSD Main Menu, select
Camera Setting, select Rear Grid Setting, select the camera to adjust.
•
Change the grid’s unit of measurement
Select Unit to format the grid’s unit of measurement in either feet or meters. Press OK to save selection.
NOTE
The OK button MUST be pressed to accept/save
changes to settings.
•
Set grid line measurements on the screen
Before setting grid lines, make sure the camera has a clear field of view, especially if grid line set up must be
completed indoors as walls, posts, etc., may interrupt the field of view.
With the parking brake applied, power up the monitor system by turning the vehicle’s ignition to “on” and placing
the transmission in reverse gear. DO NOT START THE ENGINE UNLESS IT IS NECESSARY TO ENGAGE
REVERSE GEAR.
Line 1 - Green
Line 2 - Yellow
Line 3 - Blue
Line 4 - Red
H1 H2
Farthest from Vehicle
Closest to Vehicle
(Bumper of Vehicle)
*H1 and H2 refer to the left and right distance
from the center line of the vehicle (see
Horizontal Line Set Up).
7 FT 5 FT 3 FT 0 FT
Green Yellow Blue Red