McNeilus 1487747, Операция, обслуживание и запчасти, Страница: 49 / 75

Extreme 9" Monitor/DVR System © 2014 McNeilus Truck and Manufacturing, Inc.
45
Possible Causes How to Diagnose How to Correct Problem
J. Camera Input Views Cycling Through On The Monitor
1.
Set Up: Auto
Scan Time
Check the Auto
Scan Time set up.
Reference Page 17.
K. Vertical White Line Through The Image On The Monitor
1. Camera Angle Check the camera's
angle.
The white line is most typically caused by sunlight shining directly into the
camera.
1. Adjust the viewing angle of the camera more downward.
2. May need to reposition the camera bracket on the body of the truck to get a
better angle.
Remove the camera bracket and camera from the truck. Remove the camera
from the camera bracket. Rotate the bracket to give the camera a different
position in the bracket. Replace the camera in the bracket. Replace the bracket
on the truck.
L. Unable To Achieve Correct Camera Viewing Angle
1. Camera Angle Check the camera's
angle.
1. Adjust the viewing angle of the camera more downward.
2. May need to reposition the camera bracket on the body of the truck to get a
better angle.
• Remove the camera bracket and camera from the truck. Remove the
camera from the camera bracket. Rotate the bracket to give the camera
a different position in the bracket. Replace the camera in the bracket.
Replace the bracket on the truck.
M. Unable To Access DVR Main Menu
1.
Unable to
access DVR
Main Menu
Press the DVR Main
Menu button on the
touchscreen and the
DVR Menu does not
appear.
1. Push the Menu button to enter the OSD menu.
Press the DVR icon in the upper right hand corner of the OSD menu.
The DVR menu will appear.
If you cannot access the DVR menu, you may need to remove the SD Card in
order to stop the DVR recording. The DVR menu should now be accessible.
After making necessary changes to the DVR options, reinsert the SD Card
to start recording immediately. Refer to Troubleshooting item H, number 2 to
determine if the DVR is recording.
N. Unable To Access OSD Menu
1.
Unable to
access OSD
Main Menu
Press the Menu
button on the
monitor's front
panel.
1. Push the Menu button to enter the OSD menu.
2. If unable to access the OSD menu, the monitor may possibly be Passcode
locked, refer to Page 31 to unlock.
O. GPS Location is Not Correct in Analytics
1.
GPS Antenna
Location
GPS does not
display correctly in
Analytics.
1. Relocate the GPS antenna to the cab dash or inside windshield in full view of
satellites.
P. Camera Displays Poor Quality (Grainy) Picture
Contact Street Smart Parts™ at 507-374-6321
Troubleshooting