McNeilus 1487747, Операция, обслуживание и запчасти, Страница: 21 / 75

Extreme 9" Monitor/DVR System © 2014 McNeilus Truck and Manufacturing, Inc.
17
Main Menu Functions
Pin 1
Pin 2
Pin 3
Pin 4
2-Second Off Delay
Module P/N 1452176
Pin Assignments:
Pin 1 = Turn
Pin 2 = Ground
Pin 3 = Ignition
Pin 4 = Output to Camera Trigger
Turn Signal Delay Module (Optional)
You may need to use the 2-second off delay
module P/N 1452176 to retain the directional
image on the monitor screen while the turn
signal is activated.
NOTE: One module P/N 1452176 is used for
one turn signal. If you want both the left and
right turn signals connected to cameras, you
need two modules. Deutsch connectors are
required, but not provided.
•
Auto Scan Time
- for surveillance usage. Not for use while truck is moving. Sets the amount of time, in
seconds, for automatic cycling through camera image views (Figure 6). The amount of time (one second to
100 seconds) is how long each camera image will remain on the screen before cycling to the next input. Keep
the seconds as zero if you do not want automatic cycling through the camera images.
To set up, press and hold the Menu button on the Front Panel Buttons until the OSD Main Menu
displays (or press the Menu button on the Remote Control). Select Camera Settings, then select Auto
Scan Time, set the amount in seconds (use Left and Right arrows on the touchscreen, or the Down and
Up arrows on the Remote Control). Press the OK button on the touchscreen to save the setting.
•
Camera System - formatting for NTSC (North and South America) or PAL (Europe) (Figure 6).
Figure 6: Auto Scan Time and Camera System.