McNeilus 1487747 Скачать руководство пользователя страница 13

Страница: 13 / 75

Extreme 9" Monitor/DVR System

Installation

Power Accessory Harness

Part number for the Power Accessory Harness is 1511546.

RED

BLACK

YELLOW

GRAY

BLUE

GREEN

PURPLE

BROWN

PWR

Left

Fron

Park

Battery

Reverse

Right

Wire

Function

Note

RED

ACC POWER

Connect to Ignition Power Source.

BLACK

GROUND

Connect directly to the battery ground or to a good chassis ground.

YELLOW

BATTERY

Connect to the battery or a constant power source to ensure your monitor

settings do not reset if the monitor is turned off for an extended period of time.

And/or will allow the DVR system to operate when LCD screen is off (see

Ignition Set Up, Page 30).

NOTE:

The following wires only need to be used if you desire the camera to display when the vehicle is in a specific

operation (e.g., Reverse).

GREEN

REVERSE / BACK UP

(CAMERA A)

If you want this camera to be activated and displayed when the truck is in

Reverse, connect the Green wire to a Reverse/Back Up signal.

PURPLE

LEFT TURN

(CAMERA B)

If you want this camera to be activated and displayed when the Left Direction

Turn Signal is activated, connect the Purple wire to the directional signal Left.

BROWN

RIGHT TURN

(CAMERA C)

If you want this camera to be activated and displayed when the Right Direction

Turn Signal is activated, connect the Brown wire to the directional signal Right.

BLUE

FRONT / HOPPER

(CAMERA D)

If you want this camera to be activated and displayed when the truck is in

Drive, connect the Blue wire to a Power signal.

GRAY

PARK

(CAMERA E)

If you want this camera to be activated and displayed when the truck is in Park,

connect the Gray wire to a Park signal.

NOTE:

When a trigger wire is activated, that camera takes precedence over all other recording options for the period of

time that the trigger wire is activated.

NOTE:

Using a directional turn signal to activate a camera will require the use of the 2-second off delay module (P/N

1452176).

Содержание 1487747












































































Результаты поиска

Содержание 1487747

Отзывы:

McNeilus 1487747, Операция, обслуживание и запчасти, Страница: 13 / 75

Результаты поиска

Содержание 1487747

Отзывы: