McNeilus 1487747, Операция, обслуживание и запчасти, Страница: 23 / 75

Extreme 9" Monitor/DVR System © 2014 McNeilus Truck and Manufacturing, Inc.
19
Main Menu Functions
The following measurements are recommended by McNeilus.
1. Select Rear Grid Setting .
2. Select the camera that you want to set up with a distance grid.
3. Turn the display of the grid on/off on the monitor.
4. Make sure the camera is centered on the back of the vehicle and pointing downward so that you can see
the bumper/back edge of vehicle.
5. Use a measuring tool (such as a tape measure) to mark out the distance behind the vehicle. Use objects
such as safety cones to identify the lines during measuring.
Line 4: The distance directly behind the vehicle, which is the bumper or back edge of vehicle (0 feet from
vehicle), is the Red Line on the monitor screen.
Line 3: Measure 3 feet from the back edge of the vehicle out from the vehicle. This distance is the Blue
Line on the monitor screen.
Line 2: Measure 5 feet from the back edge of the vehicle out from the vehicle. This distance is the Yellow
Line on the monitor screen.
Line 1: Measure 7 feet from the back edge of the vehicle out from the vehicle. This distance is the Green
Line on the monitor screen.
6. Adjust the Line dimensions (Line 1, Line 2, etc.) in the OSD Menu to match the dimensions given above
(these are the lines that will display on the monitor). For each line dimension, press the right arrow to
increase or the left arrow to decrease the achieve the desired measurement. Press OK to save. Dimensions
move in 1/2 foot increments.