McIntosh MX132, Руководство пользователя

Страница: 43 / 52

43
Figure 55
Figure 54
Figure 53
Figure 52
OPERATION
How to Operate the Surround Mode, con’t
Figure 57
Figure 56
Figure 51
Figure 58
Music 1
This processing mode creates an effect
similar to listening in a large room or
an outdoor area. The Left and Right
Stereo signals are combined and sent
to the Left and Right Surround loud-
speakers with a long time delay. The
combined Left and Right signals are also sent to the Center
loudspeaker. The front panel Display will indicate MUSIC
1. The Output Format LED’s L, C, R, LS, RS and SUB
will light. Refer to Figures 52 and 51.
Note: If DTS FULL RANGE MODE ON is selected in the
SPEAKER SIZE MENU, and any MUSIC mode is
selected, then all speakers are automatically
reconfigured for LARGE. This mode is switched on
whenever a DTS encoded music signal is detected. DTS
movie sound tracks from a DVD or Laser Disc player
should be reproduced in CINEMA or THX CINEMA
mode in order to restore the required LFE channel bass
boost.
Cinema
This provides decoding of Dolby Pro Logic 2 channel
Analog or Digital signals and decoding of Dolby Digital
signals or DTS signals. The front panel Display will indi-
cate CINEMA. The Output Format LED’s L, C, R, LS, RS
and SUB will light. Refer to Figures 53 and 51.
THX Cinema
THX signal processing is active in this mode, and is best
for reproducing a film sound track that was originally cre-
ated for use in a movie theater. THX Adaptive
Decorralation, Re-EQ Filtering and Timbre Match are
added to the Pro Logic, Dolby Digital and DTS decoded
signals. The front panel display will indicate THX CIN-
EMA. The Output Format LED’s L, C, R, LS, RS and
SUB will light. Refer to Figures 54 and 51.
External
All internal signal processing is bypassed and the six Rear
Panel EXTERNAL INPUTS are activated so the MX132
performs as a six channel preamplifier for an external pro-
cessor. The front panel display indicates EXTERNAL and
the OUTPUT FORMAT LED’s L, C, R, LS, RS, and SUB
will light. Refer to Figures 55 and 51.
Mono
All Mono Analog signals are reproduced without any pro-
cessing and are sent only to the CENTER loudspeaker.
When an Analog input is selected, the front panel display
will indicate PURE MONO. When a Digital input is se-
lected, the front panel Display will indicate DSP MONO.
All Multi channel signal sources are combined to a single
channel for mono. The OUTPUT FORMAT LED’s C and
SUB will light. Refer to Figures 56, 57 and 58.
Note: If the Subwoofer was turned OFF in the SPEAKER
SIZE setup, the OUTPUT FORMAT SUB LED will not
light.
www.eskonline.nl