23
SETUP
How to Adjust for Loudspeaker Size
Figure 8
MENU: SPEAKER SIZE
( SELECT WITH NUMBER )
1. FRONT: SMALL {THX}
2. CENTER: SMALL {THX}
3. SURROUND: SMALL {THX}
4. SUBWOOFER: YES
5. DTS FULL RANGE MODE: OFF
( PRESS E TO EXIT )
A Home Theater System can include a variety of loud-
speakers with various capabilities. The LARGE listing re-
fers to the loudspeaker capability for reproducing bass fre-
quencies down to 35Hz within -3dB of the midrange fre-
quencies. If a loudspeaker can not reproduce bass frequen-
cies down to 35Hz within -3dB of the midrange frequen-
cies it is considered SMALL. If you do not have a
subwoofer, you must have front loudspeakers that are
LARGE in order to hear the low frequencies below 80Hz.
If you are unsure as to the bass performance capabilities of
your loudspeakers, select the SMALL THX setting.
1. Press and hold the front panel Setup pushbutton ap-
proximately three seconds to enter the Setup Mode.
The SETUP pushbutton will illuminate, the word
SETUP will appear on the front panel display and the
MAIN SYSTEM SETUP MENU will appear on the
Monitor/TV screen. Refer to Figure 6.
2. Press pushbutton number 1 on the Remote Control to
access the SPEAKER SIZE MENU, which will appear
on the Monitor/TV screen. Refer to Figure 8.
Note: The very first time the SPEAKER SIZE MENU is
accessed, the factory default settings will be indicated.
3. Press number 1 if you wish to change the FRONT loud-
speakers from SMALL (THX) to LARGE.
4. Press Remote Control pushbutton numbers 2 and 3 to
select and adjust the desired settings for the CENTER
and SURROUND loudspeakers to match their low fre-
quency response capabilities.
Note: If your system includes a subwoofer, proceed to Step 6.
5. If your system does not include a subwoofer, and the
front loudspeakers are LARGE, press Remote Control
pushbutton number 4 to change the SUBWOOFER
from ON to OFF.
6. Press Remote Control pushbutton number 5 if you wish
to change DTS FULL RANGE MODE from OFF to
ON. This DTS recommended mode configures all
loudspeakers to LARGE.
Note: Refer to the Owners Manual section on SURROUND
MODES for additional operating details.
7. After all loudspeaker Size adjustments are complete,
press pushbutton E on the Remote Control to exit to
the MAIN SYSTEM SETUP MENU.
Note: Continue next to the SPEAKER TIME DELAY
adjustments. If you do not wish to perform SPEAKER
TIME DELAY adjustments, then proceed to Step 8.
8. Press E a second time to exit the MAIN SYSTEM
SETUP MENU, and the Adjustment Acceptance
MENU will appear on the screen. Refer to Figure 7.
9. If you are satisfied with adjustments or changes you
have made, press number 1 on the Remote Control for
YES. The changes will be saved in memory and you
will exit the Setup Mode to normal operation.
10. If you are not satisfied with the adjustments or
changes you have made, press number 0 on the remote
control for NO. The Setup Mode will exit to normal
operation without saving the changes in memory.
t
n
e
m
g
i
s
s
A
e
z
i
S
r
e
k
a
e
p
S
r
e
k
a
e
p
S
g
n
it
t
e
S
tl
u
a
f
e
D
g
n
it
t
e
S
w
e
N
t
n
o
r
F
}
X
H
T
{
ll
a
m
S
r
e
t
n
e
C
}
X
H
T
{
ll
a
m
S
d
n
u
o
rr
u
S
}
X
H
T
{
ll
a
m
S
r
e
f
o
o
w
b
u
S
s
e
Y
e
d
o
M
e
g
n
a
R
ll
u
F
S
T
D
ff
O
www.eskonline.nl
