19
How to Operate the
Remote Control
How to Operate the Remote Control
Mute
Press the MUTE pushbutton to mute audio in all Input A
outputs. The front panel display will indicate Mute. Press
Mute again to unmute audio. In Zone B, press MUTE to
mute only Zone B audio. The LED in the Zone B IR wall
sensor or keypad will blink on and off to indicate MUTE is
active. Press MUTE a second time to unmute Zone B au-
dio.
Audio
Press any of the twelve input pushbuttons to select an au-
dio or audio/video program source. The non-numbered In-
put pushbuttons also are used to reassign Digital and Ana-
log inputs.
CD/Tape
Press these pushbuttons to operate a CD player, CD
changer or tape recorder, when the component is connected
to the MX132 with a McIntosh RCT Translator.
Tuner Pushbuttons
Select AM or FM broadcast band. Press and release SEEK
Up or Down to move from station to station. Press and hold
a SEEK Press-button to move continuously from station to
station. Press REVIEW to start the automatic brief audition
of each of the presets stored in the tuner memory. Press
REVIEW a second time to stop on a station preset and exit
the Review process.
Volume
Press a VOLUME Up or Down pushbutton to raise or
lower the listening volume level in either Zone A or B. The
TAPE and VCR Outputs are not affected.
Trim
Press TRIM to enter the TRIM adjustment mode. TRIM
adjustments are performed with the LEVEL pushbuttons.
Press TRIM again to cycle through the TRIM modes.
Numbered Pushbuttons
Press 0 through 9 to access tuner station presets, CD tracks/
discs and performs various functions with McIntosh Com-
ponents.
Home
When the optional HC-1 Home Controller is added to the
MX132 system, Press the HOME Pushbutton to select the
HC-1. Within 5 seconds Press one of the numbered
pushbuttons to activate a desired relay in the HC-1.
Sys Off
Press SYS OFF (System Off), to turn off the entire McIn-
tosh Audio/Video system.
Power
Press POWER to turn on the zone where the Remote Con-
trol is located.
E
Press E to perform various functions on a variety of McIn-
tosh Components.
Mode
Press the MODE pushbutton to change operating modes
and performs various functions with McIntosh Compo-
nents.
Level
Press a LEVEL Up or Down pushbutton to make Trim ad-
justments and performs various functions with McIntosh
Components.
ACC ON - OFF
Press ACC ON or ACC OFF to turn power ON and OFF of
components that are connected with a McIntosh RCT
Translator - Repeater. Only the ACC ON Pushbutton is ac-
tive with the McIntosh LV or DVD Disc Player.
NOTE: When other brands of components are connected with a
McIntosh RCT Translator, refer to the RCT Owners
Manual for further information on alternate Remote
Control pushbutton functions.
Alternate MX132 Pushbutton Functions
MX132 pushbutton MCD7010 Function MLD7020 Function
Review
+10
+10
Seek Down
REVerse
REVerse
Seek Up
FF (Fast Forward)
FF (Fast Forward)
E (Enter)
Pause
Pause
AM
Side A
FM
Side B
ACC On
Power
www.eskonline.nl
