21
MENU: MAIN SYSTEM SETUP
( SELECT WITH NUMBER )
1. SPEAKER SIZE
2. SPEAKER TIME DELAY
3. SPEAKER LEVEL
4. ANALOG INPUTS
5. DIGITAL INPUTS
6. VIDEO POWER CONTROL
7. VIDEO CONVERTER
8. ZONE B VOLUME PRESET
9. RESERVED
( PRESS E TO EXIT )
Figure 6
ADJUSTMENTS HAVE BEEN MADE
DO YOU WANT TO SAVE THEM?
( PRESS NUMBER BUTTON )
0 NO
1 YES
Figure 7
SETUP
Default Settings
The following listings indicate the factory default set-
tings. Refer to the listed page number for instructions on
how to change a default setting.
Default Settings
Speaker Size:
Speaker Type
Size or ON/OFF
Refer to Page
Front ........................ Small (THX) ............... 23
Center ...................... Small (THX) ............... 23
SURR ...................... Small (THX) ............... 23
Subwoofer ............... Yes .............................. 23
DTS (Full Range).... OFF ............................. 23
Speaker Time Delay:
Speaker Location Viewing Distance
Refer to Page
Left Front .............. 10 feet ........................ 24
Center .................... 10 feet ........................ 24
Right Front ............ 10 feet ........................ 24
Right Surr .............. 10 feet ........................ 24
Left Surr ................ 10 feet ........................ 24
Subwoofer ............. 10 feet ........................ 24
Speaker Level:
Speaker Location Initial Level
Refer to Page
Left Front ...................0 ............................. 26
Center .........................0 ............................. 26
Right Front .................0 ............................. 26
Right Surr ...................0 ............................. 26
Left Surr .....................0 ............................. 26
Subwoofer ..................0 ............................. 26
Bass Limiter ...............Off ......................... 28
Analog Inputs (Zones A and B):
Number
Name
Refer to Page
0 ......................... TUN (1*) ................... 29
1 ......................... AUX (1*)................... 29
2 ......................... CD1 ........................... 29
3 ......................... CD2 ........................... 29
4 ......................... TAPE 1 ...................... 29
5 ......................... TAPE 2 ...................... 29
6 ......................... SAT (1*) .................... 29
7 ......................... TV (1*) ...................... 29
8 ......................... LV (1*) ...................... 29
9 ......................... VCR 1 ........................ 29
10 ....................... VCR 2 ........................ 29
11 ....................... DVD (1*)................... 29
the MONITOR/TV screen for further action. Follow
the instructions for each of the setup menus. Refer to
Figure 6.
4. After all adjustments are complete, press pushbutton E
on the Remote Control to exit from a specific setup
menu back to the MAIN SYSTEM SETUP MENU.
5. Press E again to exit from the MAIN SYSTEM
SETUP MENU.
6. If adjustments have been performed, the Adjustment
Acceptance Menu will appear on the Monitor/ TV
screen asking if you want to save the adjustments in
memory. Press number 1 for YES to save, or number 0
for NO to not save, and you will exit the Setup Mode
back to normal operation. Refer to Figure 7.
* Indicates an implied number, which will apply only when
a second component of the same type is assigned an input.
www.eskonline.nl
