McIntosh MX132, Руководство пользователя

Страница: 27 / 52

27
SETUP
How to Adjust Speaker Levels, con’t
Figure 13
MENU: BASS LIMITER
(SELECT WITH NUMBER)
1. LIMITER (OFF)
(PRESS E TO EXIT)
Note: Before performing the BASS LIMITER calibration, you
FIRST must have performed the SPEAKER SIZE,
SPEAKER TIME DELAY and SPEAKER LEVEL
adjustments.
8. Press Remote Control pushbutton 3 to access the
BASS LIMITER MENU.
Note: The factory default setting for the BASS LIMITER is
OFF.
9. Press pushbutton number 1 to access the BASS LIM-
ITER SETUP MENU and follow the BASS LIMITER
SETUP instructions.
10. If you do not wish to continue with the BASS LIM-
ITER SETUP, press pushbutton E on the Remote Con-
trol to exit to the MAIN SYSTEM SETUP MENU.
11. Press E a second time to exit the MAIN SYSTEM
SETUP MENU and the Adjustment Acceptance
MENU will appear on the Monitor/TV screen. Refer to
Figure 7.
12. If you are satisfied with the SPEAKER LEVEL ad-
justments you have made, press Remote Control
pushbutton number 1 for YES. The changes will be
saved in memory and you will exit the Setup Mode to
normal operation.
13. If you are not satisfied with the adjustments or
changes you have made, press number 0 on the remote
control for NO. The Setup Mode will exit to normal
operation without saving the changes in memory.
Note: If no adjustments were made, Press Remote Control
pushbutton E to exit to the MAIN SYSTEM SETUP
MENU and Press E a second time to exit the Setup
mode back to normal operation. The Acceptance Menu
will not appear.
Manual Speaker Level Switching
14. Press pushbutton number 2 on the Remote Control to
start manual loudspeaker switching, the Monitor/TV
screen will indicate MANUAL (ON) and the LEFT
FRONT Level number will blink on and off.
15. Adjust the volume of the test signal by pressing a Re-
mote Control LEVEL Up or Down pushbutton. As a
level is changed, the Monitor/TV screen instantly indi-
cates the level change. If the level is increased or de-
creased, the display will indicate numbers or minus
numbers.
Note: The Left Front Loudspeaker volume level can serve as a
reference. The THX recommended level is 75dB as
indicated on a sound pressure level meter.
16. Press number 2 again on the MX132 Remote Control
and the CENTER level number will blink on and off.
17. Repeat Step 15 to adjust the level of the CENTER
loudspeaker.
18. Press 2 each time you wish to advance to the next
loudspeaker and repeat Step 15.
19. Repeat the level adjusting procedure as often as nec-
essary until you are satisfied that the volume levels are
the same from all of the loudspeakers.
Note: Before performing the BASS LIMITER calibration, you
FIRST must have performed the SPEAKER SIZE,
SPEAKER TIME DELAY and SPEAKER LEVEL
adjustments.
20. Press Remote Control pushbutton 3 to access the
BASS LIMITER MENU.
Note: The factory default setting for the BASS LIMITER is
OFF.
21. Press pushbutton number 1 to access the BASS LIM-
ITER SETUP MENU and follow the BASS LIMITER
SETUP instructions.
22. If you do not wish to continue with the BASS LIM-
ITER SETUP, press pushbutton E on the Remote Con-
trol to exit to the MAIN SYSTEM SETUP MENU
23. Press E a second time to exit the MAIN SYSTEM
SETUP MENU and the Adjustment Acceptance
MENU will appear on the Monitor/TV screen. Refer to
Figure 7.
24. If you are satisfied with the SPEAKER LEVEL ad-
justments you have made, press Remote Control
pushbutton number 1 for YES. The changes will be
saved in memory and you will exit the Setup Mode to
normal operation.
www.eskonline.nl