McIntosh MX121, Руководство пользователя

Страница: 33 / 52

33
HR078
DFR
Figure 44
How to Operate the MX121
illuminate.
Input Format:
A. If the input signal source is Eight Channel, the
front panel INPUT FORMAT LEDs FL, C, FR,
SR, SBR, SBL, SL and LFE will illuminate.
Refer to figure 41.
B. If a Digital Input
Signal Source is
2 Channel Sur-
round Encoded, the
front panel INPUT
FORMAT LEDs
FL, FR and S will
illuminate.
Note: The “S” indicator will only illuminate on
some surround encoded program material.
C. If the Analog Input Signal Source is Stereo,
the INPUT FORMAT LEDs FL and FR will
illuminate.
D. If an Analog Input Signal Source is Mono, both
channels will be receiving the mono signal and
the INPUT FORMAT LEDs FL and FR will
illuminate.
Operating Mode Displays:
E. The ANALOG SIGNAL Display will illuminate
when the audio input signal is analog. Refer to
figure 42.
F. The DIGITAL SIGNAL Display will illuminate
when the audio input signal is Digital.
G. The HDMI SIGNAL Display will illuminate
when the audio input signal is Digital High
Definition such as Dolby True HD or DTS
Master HD.
H. The MULTEQ XT Display will illuminate when
Audyssey Room Correction Circuitry is Active.
I. The DYNAMIC VOL Display will illuminate
when Audyssey Dynamic Volume Circuitry is
Active.
J. The DYNAMIC EQ Display will illuminate
when Audyssey Dynamic Equalization Circuit-
ry is Active.
Output Format:
K. The OUTPUT FORMAT LEDs indicate the
SURROUND MODE selected and the active
audio channels. Refer to figure 43.
Note: The following example of the illuminated
LED is
based upon
a 7.1 chan-
nel system.
If your
system is
configured
as some-
thing other
than 7.1 (e.g.
no Center Loudspeaker or a single Sur-
round Back Loudspeaker) then the number
of LEDs illuminated will be different.
L. NO PROCESSING mode for a two channel (Ste-
reo) Input will cause the FL, FR and SUB LEDs
to illuminate.
Figure 41
Figure 43
Figure 42