McIntosh MX121, Руководство пользователя

Страница: 29 / 52

29
Setup Mode, con't
Input Source Level
Input Source Level allows for setting volume levels
for each of the Inputs. This helps to prevent an abrupt
change in the volume when switching between
different inputs. When a Source Input is assigned
with both analog and digital input connections there
are separate adjustments for each of them. Perform
the following steps to make the settings:
1. Select the desired Source.
2. Press the MENU Push-button, then select
"Input Setup", "Source Level" and then press the
ENTER Push-button. Refer to figure 31.
2. Use the Directional Push-buttons to select and
make changes. The range of level adjustment is
±12dB.
INPUT SETUP
SOURCE LEVEL
RETURN Return
AUX1 0dB
Digital Input 0dB
Compensate analog audio input playback level
Figure 31
Audio Setup
Audio Setup allows setting the 7.1 Channel Analog
Input Subwoofer Level. There are also settings for
not indicating all Audyssey
®
Settings on the MX121
Front Panel Information when the MULTEQ Push-
button is pressed. Perform the following steps to
make the settings:
1. Press the MENU Push-button, then select
"Manual Setup", "Audio Setup" using the
directional Push-buttons. Refer to figure 32.
2. Use the Directional Push-buttons to select "7.1 ch
in SW Level". The default setting for the MX121
is +10dB of which is the proper level for most
DVD/Blu-ray players with 7.1 channel outputs.
If after performing the players internal setup and
the Subwoofer Output is either too low or too
high in level to match the other channels, choose
the MX121 other setting of +15dB, +5dB or 0dB.
3. To prevent certain Audyssey
®
Settings from
being displayed and acted on, selecting one or
more of the following:
Audyssey Byp. L/R --- Choices include USED (de
fault setting) and NOT USED.
Audyssey Flat --- Choices include USED (default
setting) and NOT USED.
Manual --- Choices include USED (default setting)
and NOT USED.
Figure 31
Set subwoofer playback level in 7.1ch IN mode
7.1ch IN SW Level
EQ Customize
MANUAL SETUP
AUDIO SETUP
Manual Equalization
The MX121 allows Corrective Equalization to be
performed manually. Make sure the EQ Customize
Settings under Audio Setup (previous column) are
set to "used". Perform the following steps to make
the settings:
1. Refering to the MX121 Front Panel Display,
press the MULTEQ Push-button several times
while watching the display until "MULTEQ XT
MANUAL" appears.
2. Press the MENU Push-button, select "Audio/
Video Adjust" then "Audio Adjust" using the
directional Push-buttons. Refer to figure 32.
3. Select "Manual EQ" the press the ENTER Push-
button. Refer to figure 33.
Adjust surround sound parameter
AUDIO/VIDEO ADJUST
AUDIO ADJUST
Surround Parameter
Audyssey Settings
Manual EQ
Audio Delay
Figure 32
Adjust tonal quality for all speakers together
AUDIO/VIDEO ADJUST AUDIO ADJUST
MANUAL EQ
Adjust CH All
Base Curve Copy
Default
RETURN Return ENTER Enter
Figure 33