McIntosh MX121, Руководство пользователя

Страница: 30 / 52

30
4. Using the directional push-buttons select from
"All", "L/R" or "Each"; then press the ENTER
Push-button. Refer to figure 34.
5. Depending on the previous choice select a
specific speaker and/or proceed to select a
frequency band and make the desired increase
or decrease in levels using the Directional Push-
buttons.
The "Base Copy Curve" copies the Audyssey MultEQ
flat response curve to provide a starting place for per-
forming Manual Equalization. The "Default" setting
returns all channels to 0dB.
Manual Equalization, con't
Select freq band, adjust level
Front
D
AUDIO/VIDEO ADJUST AUDIO ADJUST
MANUAL EQ
RETURN Cancel
+6
0
-6
-20
63
125 250 500
iK
2K 4K 8K
16K
63Hz 0.0dB
Figure 34
Surround Parameter
The MX121 has additional Surround Processing
Options depending upon the type of Input Signal
(e.g. Dolby Digital, Dolby True HD, DTS, etc.).
Perform the following steps to make changes to the
default settings:
1. Start Playback of the desired Source.
2. Press the MENU Push-button, select "Audio/
Video Adjust", "Audio Adjust" then "Surround
Parameter" using the directional Push-buttons.
Refer to figure 35.
3. Refering to figure 36 select the Surround
Parameter to be changed.
HT-EQ --- Softens the High Frequencies for better
understanding.
DRC --- Reduces the dynamic range from loud to soft
passages with Dolby True HD sound tracks.
Adjust surround sound parameter
AUDIO/VIDEO ADJUST
AUDIO ADJUST
Surround Parameter
Audyssey Settings
Manual EQ
Audio Delay
Figure 35
Soften treble in movies for clearer sound
AUDIO/VIDEO ADJUST AUDIO ADJUST
SURROUND PARAMETER
HT-EQ OFF
D.Comp OFF
LFE 0dB
DEFULT
DOLBY DIGITAL
Figure 36
The default setting is AUTO which will
automatically adjust depending on the signal.
LOW/MID/HIGH are manual settings.
OFF allows full dynamic range of the signal.
D.Comp --- Reduces the dynamic range from loud to soft
passages. LOW/MID/HIGH are manual set-
tings. OFF allows full dynamic range of
the signal.
LFE --- Adjust the Low Frequency Effects level. Default
setting is 0dB and other choice is -10dB.
C.Image --- Produces a wider Center Channel Image by
sending some of the Center Channel in-
formation to the Front Left and Right
Channels. Default setting is 0.3 and the
range of adjustment is from 0.0 to 1.0.
Panorama --- Default setting is OFF, the ON setting sends
some of the Front Left and Right informa-
tion to the surround speakers.
Dimension --- Default setting is 3 with a range from 0
to 6. Shifts the sound image between Front
and Rear speakers.
C. Width --- Default setting is 3 with a range from 0
to 7. Copies the Center Channel information
and sends it the Front Left and Right
speakers.
Height Gain --- When Front Height Speakers are in the
system, there are three to choose from.
The default setting is MID which sets a
level to match the other channels. The
other Settings are LOWer and HIGHer
than the MID setting.
Default --- Returns all the Surround Parameter adjustment
to their default settings.