McIntosh MX121, Руководство пользователя

Страница: 35 / 52

35
HR078
DFR
Figure 44
the Directional Push-buttons select "Audio/Video
Adjust", "Audio Adjust" and then "Tone" followed by
pressing the ENTER Push-button. First select "Tone
Control" ON, then select "BASS" or "TREBLE". The
range of tone adjustment is from -6dB to +6dB by
using the Directional Push-buttons.
Audio Delay
The MX121 has built in Auto Lip Sync. Occasionally
when viewing a specific Digital Audio/Video Program
the Lip Sync might not be correct. To correct the prob-
lem press the A.DELAY Push-button on the Remote
Control and then use the Directional Push-buttons to
find a setting to bring into sync the image and sound.
DFR
When listening to audio program material that has
been compressed such as the MP3 Sound Format,
improvements in the sound quality can be made by
using the built in DFR Circuitry. There are four DFR
settings (OFF[default], LOW, MID and HIGH). Step
through the settings by repeated pressing of the DFR
(5) Push-button on the Remote Control. Refer to the
Front Panel Information Display.
Note: The DFR Circuitry works with Analog and Dig-
tial PCM (44.1/48kHz) signals.
Analog/Digital Function
By repeated pressing of the A/D Push-button on the
Remote Control, various Audio Input Connection Op-
tions appear on the MX121 Front Panel Information
Display. Depending on the Input Souce Name (and the
connection assigment) the choices could include Auto,
HDMI, Digital, Analog and/or 7.1CH IN. This allows
listening to audio from other than the assigned Audio
Input Connection.
Note: For additional information refer to "Input
Connetion Assignment/re-assignment on page
24. When the A/D Function is set to "Auto" the
MX121 will select the Audio Connection Type with
signal present starting with HDMI (highest pos-
sible resolution) down through to Analog (lowest
possible resolution).
On-Screen Source Select
Pressing the SOURCE SELect Push-button on the Re-
mote Control and the On-Screen Display will indicate
the most recently selected Input Sources and for quick
selection of another Input Source by use the Direction-
al and Enter push-buttons. Refer to figure 45.
Speakers A and B Switching
When the Front Wide Channels as part of a 7.1 plus
Home Theater System are not used, they can be used
to drive an additional power amplifier (from the WL
and WR unbalanced output connections) and a sec -
ond pair of Front Left and Front Right Loudspeakers.
Repeated presses of the SPKR A/B Push-button on the
Remote Control steps through Speakers A, B or A+B.
Source Select :Flickr
Recent Source
Enter
Select
ENTER
Figure 45