McIntosh MX121, Руководство пользователя

Страница: 11 / 52

11
MX121 Main Zone Input Connections
MX121 Main Zone Input Connections
The MX121 has the ability to automatically switch
power On/Off to McIntosh Source Components via
the Power Control/Trigger connections. The Data Port
Connections allow for the remote operation of basic
functions using the MX121 Remote Control. With an
external sensor connected, remote control operation of
the system is possible when the MX121 is located in a
cabinet with the doors closed (Main Zone).
The Main Zone connection instructions below,
together with the MX121 Input Connection Diagram
located on the separate folded sheets “ Mc2A ”, is an
example of a typical Home Theater System. Your
system may vary from this, however the actual com-
ponents would be connected in a similar manner. For
additional information refer to “Connector and Cable
Information” on page 6.
Note: The following source component and sensor con-
nections made to the MX121 are using the default
settings. Refer to page 24.
Power Control Connections:
1. Connect a Control Cable from the MX121 PWR
CTRL TRIGGER 1 Jack to the Power Control
Remote In on the Turntable.
2. Connect a Control Cable from the Turntable
Power Control Remote Out jack to the AM/FM
Tuner Power Control In Jack.
3. Connect a Control Cable from the AM/FM Tuner
Power Control Out Jack to the Audio/Video Disc
Player Power Control In Jack.
4. Connect any additional McIntosh Components in
a similar manner, as outlined in steps 1 thru 3.
5. Connect a Control Cable from the Power Control
Output Jack (from the last component a Power
Control Input connection was made) onto the first
Power Amplifier with a Power Control Input jack.
Data Control Connections:
6. Connect a Control Cable from the MX121 DATA
OUT Jack to the AM/FM Tuner Data In Jack.
IR In Connections:
7. Optionally, connect the Control Cable from the
Main Zone External Sensor (or external IR Con-
nection Block) to the MX121 IR IN Jack.
Note: Refer to page 5 for information on compat-
ible Sensors and page 6 for Cable/Connection
information.
Analog Audio Connections:
8. Connect an Audio Cable from the MX121 ANA-
LOG AUDIO IN TUNER Jacks to the Tuner
unbalanced Analog Output Jacks.
9. Connect Balanced Cables from the MX121 AUX
1 BALANCED IN Jacks to the Audio/Video Disc
Player Audio Outputs Balanced 2 CHannel Jacks.
10. Connect an Audio Cable from the MX121 ANA-
LOG AUDIO IN VCR Jacks to the VCR Analog
Output Jacks.
11. Connect Audio Cables from the MX121 ANALOG
AUDIO IN PHONO Jacks to the Turntable Out
Jacks.
Digital Audio Connections:
12. Connect a Digital Coaxial Cable from the MX121
Digital COAX IN 2 Jack to the Satellite Reciever
Digital Coaxial Output Jack.
Analog Video Connections:
13. Connect a Video Cable from the MX121 COMPO-
NENT VIDEO IN 2 Jacks to the Satellite Reciever
Component Video Output Jacks, making sure to
match the “Y”, “PB” and “PR” connections at both
ends of the cable.
HDMI Connections:
14. Connect a HDMI Cable from the MX121 HDMI
IN 1 Connector to the Audio/Video Disc Player
HDMI Out Connector.
Ground Connections:
15. Connect a Ground Cable from the MX121 GND
Binding Post to the Turntable GND Binding Post.
Proceed to Main Zone Output Connections on the
next page.