McIntosh MX121, Руководство пользователя

Страница: 21 / 52

21
Setup Mode, con't
Network Settings and Functions
An example of a typical home network connected
to the MX121 for access to the internet, your system
might vary from this. Refer to figure below.
For additional information about PC Internet WEB
Browser Programs, Computers, PC Network Connec-
tions and Settings, please refer to the documentation
supplied with your computer and network hardware.
Broadband Internet and Network Connection Re-
quirements
Modem:
Device that connects to the broadband circuit and con-
ducts communications on the Internet. Routers with
an integrated modem are also available.
Router:
With the MX121 we recommend using a router
equipped with the following functions:
Built-in DHCP server - This function automatically
assigns IP addresses on the
LAN.
Built-in 100BASE-TX switch - When connecting multiple
devices, we recommend a
switching hub with a speed
of 100 Mbps or greater.
Ethernet cable: (CAT-5 or greater recommended)
Use only shielded STP or ScTP LAN cable which is
available at retailer. Some flat type Ethernet cables
MX121 Rear Panel
(Partial View)
Internet Access Device
(Cable Box or DSL Box, etc.)
Computer
(With Network Connection)
Network Router
(Wired or Wireless)
are easily affected by noise. We recommend using a
normal type cable.
Notes: 1. With the MX121, it is possible to use the DHCP
and Auto IP functions to make the network set-
tings automatically.
2. When using the MX121 with the broadband
router’s DHCP function enabled, this unit au-
tomatically performs the IP address setting and
other settings.
Network Automatic Functioning
When the MX121 is connected to a network consisting
of DHCP compliant devices and the internet service
provider is also DHCP compliant, no user manual
settings in the MX121 need to be made for normal
operations.
Network Manual Settings
When the MX121 is connected to a network with no
DHCP Functions the following settings for the IP ad-
dress, etc., will need to be made:
1. Connect the LAN cable then switch On the
MX121.
2. Press the MENU Push-button, then select "Man-
ual Setup", "Network Setup", "Network Connect-
ing".
3. Using the Directional Push-buttons highlight the
"Detail" Push-button then press the ENTER Push-
button. Refer to figure 10.
4. With DHCP highlighted use the Directional Push-
buttons to select OFF. Refer to figure 11.
5. Using the Directional Push-buttons to select "IP
Address" followed by the IP Address entry field.
Enter the number IP Address Number then press
the ENTER Push-button.
IP Address: Set the IP address within the ranges
shown below. The Network Audio
function cannot be used if other IP ad-
dresses are set.
CLASS A: 10.0.0.0 – 10.255.255.255
CLASS B: 172.16.0.0 – 172.31.255.255
CLASS C: 192.168.0.0 – 192.168.255.255
6. If the Subnet Mask, Default gateway, Primary
DNS, and/or Secondary DNS settings need to be
changed at this time enter them like the IP Ad-
dress was entered.
Subnet Mask: When connecting an xDSL modem or
terminal adapter directly to this unit,
input the subnet mask indicated in the
documentation supplied by your pro-
vider. Normally input 255.255.255.0.
Default Gateway: When connected to a gateway
(router), input its IP address.
MANUAL SETUP NETWORK SETUP
NETWORK CONNECTING
Set IP address and proxy manually
RETURN Return
DHCP ON
IP Address
Detail
Exit
ENTER Enter
Figure 10
MANUAL SETUP NETWORK SETUP
NETWORK CONNECTING
Set if using proxy server
RETURN Return
DHCP OFF
IP Address [192.168.100.019]
Subnet Mask [255.255.255.000]
Default gateway [000.000.000.000]
Primary DNS [000.000.000.000]
Secondary DNS [000.000.000.000]
Exit
Proxy
ENTER Enter
Figure 11