McAfee DR SOLOMON S ANTI-VIRUS 8.5, Руководство администратора

Страница: 177 / 224

Administrator’s Guide 177
Using Dr Solomon’s Anti-Virus Command-line Options
Running the on-demand scanner with
command-line arguments
You can run the Dr Solomon’s Anti-Virus on-demand scanner with
command-line arguments either from a Windows MS-DOS Prompt window,
or by restarting your computer in DOS mode. (You can also run the scanner
without command-line arguments, either from a Windows MS-DOS Prompt
window or from the
Start
menu’s Run dialog box.) Network Associates
recommends restarting in DOS mode for best results. To learn how to restart
your computer in DOS mode, see your Microsoft Windows documentation. To
run the program, change to the directory in which the file SCAN32.EXE is
located, and type
scan32
followed by the scanning options you want to use
(see Table C-2, “SCAN32.EXE command-line options,” on page 178 for
details).
To run the Dr Solomon’s Anti-Virus on-demand scanner, follow these steps:
1. Open an MS-DOS Prompt window from within Windows, or restart your
computer in DOS mode.
2. Change to the Dr Solomon’s Anti-Virus program directory, in which the
file SCAN32.EXE is located. If you installed Dr Solomon’s Anti-Virus
with its default options, type this line at your command prompt to locate
the correct directory:
C:\progra~1\networ~1\viruss~1
3. Type
scan32
, followed by the scan options you want to use, at the
command prompt.
The Dr Solomon’s Anti-Virus on-demand scanner will start immediately
and begin scanning your system with the options you choose. When it
has finished, it will display the results of its scan operation, then return
to the command prompt.
4. To run another scan operation, repeat Step 3 . To close the MS-DOS
Prompt window, type
exit
at the command prompt. If you restarted
your computer in DOS mode, type
win
to start Windows, or restart your
computer as you would normally.
The following table lists the arguments that can be added to the SCAN32
command.