Model: MC-1-DE
Doc Ref. No:-m05dom102
Issue No:-00
Page 17 of 76
terminal connection will be as per RS
specified during unit order. If nothing specified, the
232 electrical standard output.
If Configuration of serial terminal is as per RS
3 and Pin5) can be used for configuration and to provide serial time frame to other periphe
figuration of COM1 terminal is as per RS
and Pin 8 will be D- line.
6. LED status for TX/RX
This LED illumination is RED color
Available only when serial output is available.
7. IRIG – B1 Output
GPS TIME SYNC UNIT MC-1-DE
tor on Front panel of unit as shown in
8. IRIG – B2 Output
GPS TIME SYNC UNIT MC-1-DE
tor on Front panel of unit as shown in
9. 1PPS Output
GPS TIME SYNC UNIT MC-1-DE
on front panel of unit as shown in
terminal connection will be as per RS-232 electrical standard or RS-485 electrical standard as per
specified during unit order. If nothing specified, the factory set settings of Serial terminal is as per RS
terminal is as per RS-232 standard, cross cable (having connection on Pin2,
3 and Pin5) can be used for configuration and to provide serial time frame to other periphe
figuration of COM1 terminal is as per RS-485 standard, Pin 7 of DB-9 connector will act as D+ line
This LED illumination is RED color and it indicates transmission and reception through serial te
Available only when serial output is available.
DE provides IRIG-B TTL and IRIG-B AM output through BNC conne
panel of unit as shown in Figure 8. IRIG – B TTL / AM can be Factory Selectable
Figure 8 IRIG B Output Terminal
DE provides IRIG-B TTL and IRIG-B AM output through BNC conne
panel of unit as shown in Figure 9. IRIG – B TTL / AM can be Factory Selectable.
Figure 9 IRIG B Output Terminal
Figure 10 1PPS Output Terminal
DE provides 1PPS output at TTL signal level through BNC connector
panel of unit as shown in Figure 10.
User’s Manual
485 electrical standard as per
terminal is as per RS-
232 standard, cross cable (having connection on Pin2,
3 and Pin5) can be used for configuration and to provide serial time frame to other peripherals.If Con-
9 connector will act as D+ line
and it indicates transmission and reception through serial terminal.
B AM output through BNC connec-
Factory Selectable.
B AM output through BNC connec-
Selectable.
provides 1PPS output at TTL signal level through BNC connector
