User’s Manual
2.
Fuse Connector :
GPS TIME SYNC UNIT MC-1-DE
3. Relay Output :
GPS TIME SYNC UNIT MC-1
through 4 pin female connector.
NO terminals.
4. Event Output :
GPS TIME SYNC UNIT MC-1-DE
output provides pulse at configured event interval with pre
are Opto - MOS output (optically coupled solid state Relay output) provided through
connector
5. Serial Output :
Serial terminal on Front panel is RS
in figure 7.GPS TIME SYNC UNIT
mat on its terminal and can also be used for
Doc Ref. No:
Figure 4 Fuse
DE provide fuse of 3.15 A.
Figure 5 Alarm Relay Terminals
1-DE provide two relay outputs for Watchdog and GPS LOST alarm
pin female connector. Factory set Relay contact provided on Front panel connector are C
Figure 6 Additional event Terminals
DE has the capability to provide two event outputs .The single event
output provides pulse at configured event interval with pre-configured pulse width. This pulse outputs
MOS output (optically coupled solid state Relay output) provided through
Figure 7 Serial Output Terminal
is RS-232/RS-485 electrical standard DB-9 female connector as shown
GPS TIME SYNC UNIT MC-1-DE provides serial time frame T-format / NGTS
inal and can also be used for GPS TIME SYNC UNIT MC-1-DE configuration. This
Model: MC-1-DE
Doc Ref. No:-m05dom102
Issue No:-00
Page 16 of 76
relay outputs for Watchdog and GPS LOST alarm
panel connector are C-
The single event
configured pulse width. This pulse outputs
MOS output (optically coupled solid state Relay output) provided through 4 pin female
9 female connector as shown
format / NGTS/ NMEA for-
configuration. This
