MASCAR 5100 S, Руководство по эксплуатации и обслуживанию

Страница: 31 / 38

Wrapper 5100
Apply a coat of rust protection to any worn parts.
fig. 30 – Lubrication scheme
DANGER
Keep all lubricants, oils, solvents and paints
out of the reach of children. Read the
warnings and precautions on the containers of
liquids used thoroughly.
Wash thoroughly after use.
Dispose of used oils as required by anti-
pollution regulations..
Repeat the following checks regularly. These
checks must be also be carried out at the
beginning of each season:
DANGER
Before to operate on the parts under the
cradle, position the safety lock (F) as indicated
in fig. 33.
5.1.1 AFTER THE FIRST 10
OPERATING HOURS
After the first 10 operating hours, check:
- Check the overall condition of the machine.
- Tightness of all nuts and bolts (page 13).
-
Rotating cradle drive chain lubrication (fig. 34,
P).
- Film stretcher assembly drive chain
lubrication (fig.35, C).
5.1.2 EVERY 8 OPERATING HOURS
Every 8 operating hours:
-
Make a complete operation of greasing to all
the points earmarked with the label „greasing”
and to all the points submitted to friction (fig.
31 and 32, G).
- To oil pins earmarked with letter O (fig.31 and
32, O).
- Lubricate the pliers (fig. 33) with grease on
the points earmarked with letter G and with oil
on the points earmarked with letter O.
5.1.3 EVERY 40 OPERATING HOURS
Every 40 operating hours:
-
Check the overall condition of the machine.
- To grease bearings of rolls supports on the
cradle (fig. 34, N).
- To lubricate gear chain of the cradle (fig. 34,
P).
- To lubricate gear chain of film stretcher (fig.
35, C). If the chain isn’t tensed, to adjust the
tensioner (fig. 35, T).
5.1.4 EVERY 80 OPERATING HOURS
Every 80 operating hours :
-
To grease the rotating cradle.
USE & MAINTENANCE MANUAL - 31 -