MASCAR 5100 S, Руководство по эксплуатации и обслуживанию

Страница: 24 / 38

Wrapper 5100
The suitable pinion Z24 has installed standard
with the use of reel with a height of 750 mm.
For reels with a height of 500 mm to use the
pinion Z16 as indicated in the sticky label (fig.19).
Fig.19 – Choose of the pinion
DANGER
It’s obligatory to fix protective case before to
put in working the machine.
4.5.1 BALE WRAPPING
It’s advisable to wrap the bales with a minimum of
2 overlapped lays for at 50% (2+2).
To get this type of wrapping the bale has to make
whole tour on horizontal axis.
In particular condition it can be necessary to add
another lay (2+2+2). In this case the bale has to
make one and a half tour.
In the below table have been indicated the
necessary cradle tours to wrap bales of different
diameters with film from 500 to 750 mm,
considering an additionally cradle tour to fix the
film.
Overlapping
2+2 2+2+2
Film height (mm) 500 750 500 750
Cradle tours
20 15 30 21
Diamete
r
120
Used film (m)
(stretching 70%)
57 41 84 61
Cradle tours
25 18 37 27
Diamete
r
150
Used film (m)
(stretching 70%)
80 57 118 85
Cradle tours
27 19 39 28
Diamete
r
160
Used film (m)
(stretching 70%)
88 63 130 93
4.6 FILM HOLDER/CUTTING CLAMP
The machine has a film holder/cutting clamp (fig.
20) with automatic functioning.
The principal parts are listed hereinafter:
A- Rubber plugs to hold the film
B- Movable cutting devices holder
C- Cutting
device
D- Protection for cutting device
E- Cam for release of cutting device
F- Release lever
fig. 20 – Film holder/cutting clamp
DANGER
By stopped machine the cutting pliers has to
be always in closed position, so that the
cutting device is inside the protection.
The functioning of holder/cutting device happens
as follows:
-
Once wrapped the bale, during lifting of the
cradle for unloading, a system with a cam
close the pliers; at this phase the sliding blade
has wound up by device (E)
- The film has blocked within plugs
- Proceeding with tipping cradle, the knife
holder release towards bottom carrying out
the cut of the film
- The film has held by cutting pliers for the
wrapping of following bale.
USE & MAINTENANCE MANUAL - 24 -