MARUTI SUZUKI Dzire Скачать руководство пользователя страница 175

Страница: 175 / 324

4-6

DRIVING TIPS

56RH0-74E

Off-road driving

Do not drive in the field covered

with grown grass

If you drive in the field covered with grass,

it may cause unexpected accident or vehi-

cle damage by getting caught in grown

grass.

Do’s and Dont’s for safe
driving

Exercise care in handling your vehicle. Be

conscious of not only your own safety but

also the safety of others on the road, and

thus enjoy the best and most comfortable

driving experience.
Following are basic rules for safe driving.

Read them carefully for good understand-

ing of the content so that you can enjoy

safe and pleasant driving in your vehicle.

Starting

1) Adjust the driver’s seat for the proper

driving posture.

2) Adjust the rear view mirror so as to

obtain the best possible rear view.

72F-08-001

WARNING

In addition to following the driving

tips in this section, it is important to

observe the following precautions.

• Check that your tires are in good

condition and always maintain the

specified tire pressure. Refer to

“Tires” in the “INSPECTION AND

MAINTENANCE” section for

details.

• Do not use tires other than those

specified by MARUTI SUZUKI.

Never use different sizes or types

of tires on the front and rear

wheels. For information regarding

the specified tires, refer to the tire

information label located on the

driver’s door lock pillar.

• Never use oversized tires or spe-

cial shock absorbers and springs

to raise (jack up) your vehicle. This

will change the handling character-

istics. Oversized tires may also rub

against the fender over bumps,

causing vehicle damage or tire fail-

ure.

• After driving through water, test the

brakes while driving at a slow

speed to see if they have main-

tained their normal effectiveness. If

the brakes are less effective than

normal, dry them by repeatedly

applying the brakes while driving

slowly until the brakes have

regained their normal effective-

ness.

EXAMPLE

Содержание Dzire





































































































































































































































































































































Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды

MARUTI SUZUKI Dzire, Руководство пользователя

Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды