MARUTI SUZUKI Dzire, Руководство пользователя

Страница: 23 / 324

2-18
BEFORE DRIVING
56RH0-74E
NOTE:
Even if you cannot close the window by the
AUTO-UP feature because there may be
something wrong with the pinching preven-
tion function, you can close the window by
holding the window switch in UP position.
If you drive in extreme off-road condition,
the pinching prevention function may oper-
ate accidentally because the window
reacts to vehicle jolting.
Pinching prevention function initializa-
tion
When you disconnect and reconnect the
battery or replace the fuse, the function will
be deactivated. In this condition, the
AUTO-DOWN feature will be deactivated,
while the AUTO-UP feature may remain
activated. The pinching prevention function
needs to be initialized.
To initialize the pinching prevention func-
tion, use the following procedure:
1) Press the engine switch to change the
ignition mode to “ON”.
2) Open the driver’s window fully by hold-
ing the window switch in DOWN posi-
tion.
3) Close the driver’s window by holding
the switch in UP position, and keep
holding the switch for 2 seconds after
the window is fully closed.
4) Check the driver’s window to see if the
AUTO-DOWN/UP feature works.
If the AUTO-DOWN/UP feature will not
work after initialization, there might be
something wrong with the pinching preven-
tion function. Have your vehicle inspected
by an authorised Maruti Suzuki workshop.
Mirrors
Inside rearview mirror
You can adjust the inside rearview mirror
by hand to see the rear of your vehicle in
the mirror.
Type A
74LHT0235
Type B
68LMT0205
68LMT0206
(2) Day driving
(3) Night driving
CAUTION
• The pinching prevention function
does not operate while you are
holding the window switch in UP
position.
• The pinching prevention function
may not detect an object caught in
the window just before the window
is fully closed.
WARNING
Whenever you disconnect and recon-
nect the battery or replace the fuse,
the pinching prevention function
needs to be initialized.
The pinching prevention function will
not be activated until the initialization
is completed.
EXAMPLE
EXAMPLE
(1)
(2) (3)
EXAMPLE