MARUTI SUZUKI Dzire, Руководство пользователя

Страница: 109 / 324

2-104
BEFORE DRIVING
56RH0-74E
Light reminder buzzer
The interior buzzer continuously beeps if
you open the driver’s door without turning
off the headlights and position lights. This
function is triggered under the following
condition:
The headlights and/or position lights are
on even after the ignition switch is turned
off, or the engine switch is pressed to
change the ignition mode to “LOCK”
(OFF).
The buzzer stops sounding when you turn
off the headlights and position lights.
Daytime running light (D.R.L.)
system (if equipped)
When the engine is started, the daytime
running lights are turned on by this system.
Conditions for D.R.L. system operation
1) The engine is running.
2) Headlights and front fog light (if
equipped) are off.
NOTE:
Brightness of the daytime running lights is
different from the brightness of the position
lights, but it is not a malfunction.
Guide me light (vehicle with auto-
matic lights operation)
Guide me light has two functions of “To
home” and “To car” for improving your visi-
bility in the dark.
“To home” function
Even after you leave the car, the ground
will be illuminated for a short while with this
function. You can turn on the front position
lights and the headlights in the low beam
setting for about 10 seconds after the
engine switch is pressed to change the
ignition mode to “LOCK” (OFF).
To set the function:
1) Turn the lighting switch to “AUTO” posi-
tion.
2) Press the engine switch to change the
ignition mode to “LOCK” (OFF).
3) Pull the lighting control lever toward
you once and open the driver’s side
door within 60 seconds. Or pull the
lighting control lever toward you once
while the driver’s side door is open.
To cancel the function:
Perform any of the following operations.
• Pull the lighting control lever toward you
once.
• Change the ignition mode to “ACC” or
“ON” by pressing the engine switch.
• Turn the lighting switch to any other
position than “AUTO” position.
NOTE:
• When the “To home” is functioning, the
front fog lights and the headlights (high
beam) are not turned on.
• Lighting time of the “To home” function
can be changed on the information dis-
play. Refer to “Information display” in this
section.
“To car” function
Before you get in the vehicle, the ground
will be illuminated for a short while to easily
lead the driver to the vehicle. If UNLOCK
button of the keyless push start system
remote controller is pressed while the light-
ing switch is positioned in “AUTO”, the
front position lights and the headlights in
the low beam are turned on for 10 sec-
onds.
To cancel the function:
Perform any of the following operations.
• Lock the doors by using the keyless
push start system remote controller or
the request switch, or the key in the
driver’s door lock.
• Change the ignition mode to “ACC” or
“ON” by pressing the engine switch.
• Turn the lighting switch to any other
position than “AUTO” position.
NOTE:
• When the “To car” is functioning, the
front fog lights and the headlights (high
beam) are not turned on.
• Lighting time of the “To car” function can
be changed on the information display.
Refer to “Information display” in this sec-
tion.