MARUTI SUZUKI Dzire Скачать руководство пользователя страница 44

Страница: 44 / 324

2-39

BEFORE DRIVING

56RH0-74E

Seat belt pretensioner system

56RM02001

To determine if your vehicle is equipped

with a seat belt pretensioner system at the

front seating positions, check the label on

the seat belt at the bottom part. If the let-

ters “E11” appear as illustrated, your vehi-

cle is equipped with the seat belt

pretensioner system. You can use the pre-

tensioner seat belts in the same manner as

ordinary seat belts.

Read this section and “Supplemental

restraint system (air bags)” section to learn

more about the pretensioner system.
The seat belt pretensioner system works

with the supplemental restraint system (air

bags). The crash sensors and the elec-

tronic controller of the air bag system also

control the seat belt pretensioners. The

pretensioners are triggered only when

there is a frontal crash severe enough to

trigger the air bags and the seat belts are

fastened. For precautions and general

information including servicing the preten-

sioner system, refer to “Supplemental

restraint system (air bags)” section in addi-

tion to this “Seat belt pretensioner system”

section, and follow all those precautions.
The pretensioner is located in each front

seat belt retractor. The pretensioner tight-

ens the seat belt so the belt fits the occu-

pant’s body more snugly in the event of a

frontal crash. The retractors will remain

locked after the pretensioners are acti-

vated. Upon activation, some noise will

occur and some smoke may be released.

These conditions are not harmful and do

not indicate a fire in the vehicle.

The driver and all passengers must be

properly restrained by fastening seat belts

at all times, whether or not a pretensioner

is equipped at their seating position, to

minimize the risk of severe injury or death

in the event of a crash.

Sit fully back in the seat; sit up straight; do

not lean forward or sideways. Adjust the

belt so the lap portion of the belt is worn

low across the pelvis, not across the waist.

Please refer to “Seat adjustment” section

and the instructions and precautions about

the seat belts in this “Seat belts and child

restraint systems” section for details on

proper seat and seat belt adjustments.

Please note that the pretensioners along

with the air bags will activate in severe

frontal crashes. They are not designed to

activate in rear impacts, side impacts, roll-

overs, or minor frontal side crashes. The

pretensioners can be activated only once.

If the pretensioners are activated (that is, if

the air bags are activated), have the pre-

tensioner system serviced by an autho-

rised Maruti Suzuki workshop as soon as

possible.

If AIR BAG light on the instrument cluster

does not blink or come on briefly when the

ignition switch is turned to “ON” position or

the engine switch is pressed to change the

ignition mode to “ON”, stays on for more

than 10 seconds, or comes on while driv-

ing, the pretensioner system or the air bag

system may not work properly. Have both

systems inspected by an authorised Maruti

Suzuki workshop as soon as possible.

Service on or around the pretensioner sys-

tem components or wiring must be per-

formed only by an authorised Maruti

WARNING

This section describes your MARUTI

SUZUKI vehicle’s seat belt preten-

sioner system. Read and follow all

these instructions carefully to mini-

mize your risk of severe injury or

death.

Label

EXAMPLE

Содержание Dzire





































































































































































































































































































































Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды

MARUTI SUZUKI Dzire, Руководство пользователя

Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды