MARUTI SUZUKI Dzire, Руководство пользователя

Страница: 124 / 324

3-7
OPERATING YOUR VEHICLE
56RH0-74E
68PH00322
If the “PUSH” indicator light blinks and
the ignition modes cannot be selected
Your keyless push start system remote con-
troller may not be sensed as being within the
interior workable area (refer to the related
explanation in this section). Try again after
checking that you have the remote controller
with you. If the ignition modes still cannot be
selected, the battery of the remote controller
may be discharged. To select an ignition
mode, you must then use the following
method:
56RH00302
1) Manual transaxle – Without depressing
the clutch pedal, push the engine
switch (1).
Auto Gear Shift – Without depressing
the brake pedal, press the engine
switch (1).
2) Within about 10 seconds during which
the “PUSH” indicator light in the instru-
ment cluster is blinking, touch the
engine switch with the lock switch end
of the remote controller (2) for about 2
seconds.
NOTE:
• If you still cannot select the ignition
modes, there may be some problem with
the keyless push start system. Contact
an authorised Maruti Suzuki workshop
for an inspection of the system.
• The immobilizer/keyless push start sys-
tem warning light will come on for about
5 seconds while the “PUSH” indicator
light is blinking. Refer to “Warning and
indicator lights” in “BEFORE DRIVING”
section for details.
• You may customize the system to cause
the interior buzzer to sound once for
warning that remote controller is out of
sensing range. To incorporate this cus-
tomization, please contact an authorised
Maruti Suzuki workshop.
• If the battery of the remote controller is
becoming discharged, the keyless push
start system remote controller battery
consumption warning indicator in the
information display will come on for a
few seconds when you press the engine
switch to change the ignition mode to
“ON”. Refer to “Warning and indicator
lights” in “BEFORE DRIVING” section for
details. For details on replacing the bat-
tery, refer to “Keyless push start system
remote controller / keyless entry system
transmitter (if equipped)” in “BEFORE
DRIVING” section.
REMOTE CONTROLLER OUTSIDE
warning
When either of the conditions described
below is met, the system causes a
REMOTE CONTROLLER OUTSIDE warn-
ing by sounding the interior and exterior
buzzers. At the same time, the immobi-
lizer/keyless push start system warning
light comes on.
• Any door is opened and then closed
while the remote controller is not inside
the vehicle and the engine is running or
the ignition mode has been changed to
“ACC” or “ON” by pressing the engine
switch.
• The remote controller is not inside the
vehicle when you attempt to start the
engine after changing the ignition mode
to “ACC” or “ON” by pressing the engine
switch.
(OFF)
(Audio equipment)
EXAMPLE
(1)
(2)
EXAMPLE