MARUTI SUZUKI Dzire Скачать руководство пользователя страница 103

Страница: 103 / 324

2-98

BEFORE DRIVING

56RH0-74E

However, repeating these operations could

cause damage to the power steering sys-

tem.

NOTE:

If the power steering system does not work

properly, it will require greater effort to

steer, but you still will be able to steer.

NOTE:

If the steering is operated, you may hear

noise caused by electric power steering

operation. This is normal and indicates that

the power steering system works properly.

Engine coolant temperature warn-

ing light

54G344

When the ignition switch is turned to “ON”

position or the engine switch is pressed to

change the ignition mode to “ON”, this light

comes on briefly so you can check that the

light is working.

This indicator has the following two follow-

ing functions.

Low engine coolant temperature light

(blue color) - For petrol engine model

This light stays on while the engine is still

cold and goes off when the engine has

warmed up.

If this light blinks, there is a problem with

the system. Have your vehicle inspected

by an authorised Maruti Suzuki workshop.

High engine coolant temperature warn-

ing light (red color)

If this light blinks while driving, it means the

engine is running hot. Avoid driving condi-

tions that may lead to actual overheating. If

the light stays on without blinking, then the

engine is overheating. Follow the instruc-

tions in “Engine trouble: Overheating” of

“EMERGENCY SERVICE” section.

Turn signal indicators

50G055

When you turn on the left or right turn sig-

nals, the corresponding green arrow on the

instrument cluster will flash along with the

respective turn signal lights. When you

turn on the hazard warning switch, both

arrows will flash along with all of the turn

signal lights.

NOTE:

If any abnormality of the turn signal is

observed such as no illumination, illumina-

tion but no blinking or fast blinking there

may be a malfunction in the turn signal

systems. Ask your authorised Maruti

Suzuki workshop to have the system

inspected.

Main beam (high beam) indicator

light

50G056

This indicator comes on when headlight

main beams (high beams) are turned on.

NOTICE

Continuing to drive the vehicle when

engine overheating is indicated can

result in severe engine damage.

Содержание Dzire





































































































































































































































































































































Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды

MARUTI SUZUKI Dzire, Руководство пользователя

Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды