MARUTI SUZUKI Dzire Скачать руководство пользователя страница 206

Страница: 206 / 324

5-27

OTHER CONTROLS AND EQUIPMENT

56RH0-74E

System operating instructions

Automatic operation

56RH00540

You can let the climate control system work

automatically. To set the system for fully-auto-

matic operation, follow the procedure below.
1) Start the engine.

2) Push “AUTO” switch (8).

3) Set the desired temperature by turning

the temperature selector (1).

The blower speed, air intake and air flow

are controlled automatically to maintain the

set temperature. However, the air flow is

not changed to DEFROST position auto-

matically.

NOTE:

When the recirculated air mode is

selected, the automatic operation system

is deactivated even if you push “AUTO”

switch (8).
You can use the air conditioning switch (6)

to manually turn the air conditioner on or

off according to your preference. When

you turn the air conditioning switch off, the

climate control system cannot lower the

inside temperature below outside tempera-

ture.

To turn the climate control system off, push

“OFF” switch (7).

NOTE:

If “AUTO” in the display blinks, there is a

problem in the heating system and/or air

conditioning system. You should have the

system inspected by an authorised Maruti

Suzuki workshop.

NOTE:

• To find the temperature at which you are

most comfortable, start with the 25°C

(75°F) setting.

• If you turn the temperature selector (1)

until “HI” or “LO” appears on the display,

the climate control system will operate at

maximum heating or cooling and the

blower will run at full speed.

• To avoid blowing cold air in cold weather

or hot air in hot weather, the system will

delay turning on the blower until warmed

or cooled air is available.

• If your vehicle has been left in the sun

with the windows closed, it will cool

faster if you open the windows briefly.

• Even under the automatic operation, you

can set individual selectors to the manual

mode. The manually selected functions

are maintained, and the other functions

remain under automatic operation.

• If the windshield and/or the front door

windows are fogged, push the defrost

switch (5) to turn on the defroster, or

push the air flow selector (4) to change

the air flow to HEAT & DEFROST posi-

tion to defog the windows.

• To return the blower speed selector (2),

air intake selector (3), and air flow selec-

tor (4) to automatic operation, push

“AUTO” switch (8).

(8)

(7)

(6)

(1)

EXAMPLE

Содержание Dzire





































































































































































































































































































































Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды

MARUTI SUZUKI Dzire, Руководство пользователя

Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды