MARUTI SUZUKI Dzire, Руководство пользователя

Страница: 199 / 324

5-20
OTHER CONTROLS AND EQUIPMENT
56RH0-74E
52RS50181
NOTE:
The mark of “USE WITH” (6) is used to
clear fog on the windshield and/or the side
windows quickly, set the air flow selector
(4) to “HEAT & DEFROST” or “DEFROST”
and air intake selector (5) to “FRESH AIR”.
These positioning will clear the fogged
windshield and/or the side windows faster
than the “RECIRCULATED AIR”.
System operating instructions
Natural ventilation
Select VENTILATION and FRESH AIR, the
temperature selector to the desired tem-
perature position, and the blower speed
selector to off. Fresh air will flow through
the vehicle during driving.
Forced ventilation
The base settings are the same as for nat-
ural ventilation except you set the blower
speed selector to a position other than off.
Normal heating (using outside air)
Select HEAT and FRESH AIR, the tem-
perature selector to the desired tempera-
ture position and the blower speed selector
to the desired blower speed position. Set-
ting the blower speed selector to a higher
blower speed position increases heating
efficiency.
Quick heating (using recirculated air)
The base settings are the same as for nor-
mal heating except you select RECIRCU-
LATED AIR. If you use this heating method
for an extended period of time, the air in
the vehicle can become contaminated and
the windows can become misty. Therefore,
use this method only for quick heating and
change to the normal heating method as
soon as possible.
Head cooled/Feet warmed heating
Select BI-LEVEL and FRESH AIR, the
temperature selector to the desired tem-
perature position, and the blower speed
selector to the desired blower speed posi-
tion. Unless the temperature selector is in
the fully cold position or fully hot position,
the air that comes out of the center, side
and rear (if equipped) outlets will be cooler
than the air that comes out of the floor out-
lets.
Normal cooling
Set the air flow selector to VENTILATION,
the temperature selector to the desired tem-
perature position and the blower speed
selector to the desired blower speed posi-
tion, and turn on “A/C” switch. Setting the
blower speed selector to a higher blower
speed position increases cooling efficiency.
You can switch the air intake selector to
either FRESH AIR or RECIRCULATED
AIR as you desire. Choosing RECIRCU-
LATED AIR increases cooling efficiency.
Quick cooling (using recirculated air)
The base settings are the same as for nor-
mal cooling except you select RECIRCU-
LATED AIR and the highest blower speed.
（ 6 ）
（ 4 ）
EXAMPLE