MARUTI SUZUKI Dzire Скачать руководство пользователя страница 29

Страница: 29 / 324

2-24

BEFORE DRIVING

56RH0-74E

Head restraints (Adjustable type)

(if equipped)

80J001

Head restraints are designed to help

reduce the risk of neck injuries in the case

of an accident. Adjust the head restraint to

the position which places the center of the

head restraint closest to the top of your

ears. If this is not possible for very tall pas-

sengers, adjust the head restraint as high

as possible.

NOTE:

It may be necessary to recline the seat-

back to provide enough overhead clear-

ance to remove the head restraint.

Front

75RM004

To raise the front head restraint, pull

upward the head restraint until it clicks. To

lower the head restraint, push down the

head restraint while holding in the lock

lever. If a head restraint must be removed

(for cleaning, replacement, etc.), push in

the lock lever and pull the head restraint all

the way out.

Rear seats

Head restraints (if equipped)

Head restraints are designed to help

reduce the risk of neck injuries in the case

of an accident.

Adjust the head restraint to the position

which places the center of the head

restraint closest to the top of your ears. If

this is not possible for very tall passengers,

adjust the head restraint as high as possi-

ble.

WARNING

• Never drive the vehicle with the

head restraints removed.

• Do not attempt to adjust the head

restraint while driving.

EXAMPLE

WARNING

• Never drive the vehicle with the

head restraints removed.

• Do not attempt to adjust the head

restraint while driving.

Содержание Dzire





































































































































































































































































































































Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды

MARUTI SUZUKI Dzire, Руководство пользователя

Результаты поиска

Содержание Dzire

Отзывы:

Похожие инструкции для Dzire

Бренды по названию

Популярные бренды