VR2250
Page 65 of 131
8.2. BASIC
SETTING:
RECORDER
CONFIG
Place the rotary switch in the
ANALYSER
position, press the
MENU
key, using the
F1
/
F2
keys select the
RECORDER CONFIG
and press the
ENTER
Key.
This option allows you to check and eventually modify the recording parameters and the
selected parameters (up to a maximum of 62+Frequency). If the number of selected
values exceeds 63 the message "
too many param
" will be displayed. The RECORDER
CONFIG mode is divided into 4 separate sub-screens:
1
st
screen: This screen allows you to set the START/ STOP mode (AUTO or
MANUAL), the START and STOP time if AUTO mode is selected, the
Integration Period value, the Enabling/Disabling of Voltage Anomalies
detection, the Enabling/Disabling of Harmonics detection. Press
ENTER
to
confirm the settings and pass to the following screen.
Press
ESC
to leave the Menu without modifying the existing parameters.
2
nd
screen: This screen is devoted to the settings relevant to the
VOLTAGE
recording.
Press
ENTER
to confirm the settings and pass to the following page.
Press
ESC
to leave this screen without modifying the existing parameters.
From this page you can enter the sub-screen “Harmonics” which permits to
select the voltage harmonics to be recorded.
Press
ENTER
to confirm the settings and leave the “Menu Harmonics".
Press
ESC
to leave the "Menu Harmonics" without modifying the existing
parameters.
3
rd
screen: This screen is devoted to the settings relevant to the
CURRENT
recording.
Press
ENTER
to confirm the settings and pass to the following screen.
Press
ESC
to leave this screen without modifying the existing parameters.
From this screen you can enter the sub-screen “Harmonics” which permits to
select the current harmonics to be recorded.
Press
ENTER
to confirm the settings and leave the “Menu Harmonics".
Press
ESC
to leave the "Menu Harmonics" without modifying the existing
parameters.
4
th
screen: Menu composed of two sub-screens devoted to the selection of the
POWERS and ENERGIES
to be recorded. From this screen you can enter
the sub-screen “POWER” and “ENERGY” which permits the user to select the
parameters to be recorded.
Selecting the active powers for the recording, the corresponding active
energies will be automatically selected.
Selecting the reactive powers for the recording, the corresponding reactive
energies will be selected.
Press
ENTER
to leave this screen confirming the modifications made.
Press
ESC
to leave the "Menu" without modifying the existing parameters.
The various screens of the "
RECORDER CONFIG
" can be schematised as follows:
