Marquis 500 Sport Bridge, Руководство пользователя

Страница: 97 / 124

M
aintenance
M
aintenance
typE A typE b typE c typE D
EXTERIOR
(CONTINUED)
Clean Plexiglas surfaces
X
Lubricate hinges, latches, and locks X X
Wash weather covers X
BILGE SYSTEm
Check hull drain plug X X
Check and test bilge pumps X X X X
Inspect sump pump(s) X X
Check and test bilge blowers Each time
before starting
engine Each time before
starting engine Each time before
starting engine Each time before
starting engine
**Inspect the zinc anodes at least once every two weeks . Check with local marina or consult other local yacht owners to determine
the average life expectancy of the yacht’s zinc anodes . If a rapid deterioration of the zinc anodes is noticed, have a professional yacht
corrosion specialist check: the yacht, local seawater, and dock .
** Owner is recommended to clean and wax fiberglass on a regular basis (monthly) but not as part of a 25 hour check by dealer
e
xterior
m
aintenanCe
The Exterior Maintenance section explains how to maintain various materials located on the cabin exterior, and how to help keep the
yacht looking new .
FIBERGLASS SURFACES
The exterior fiberglass surfaces are coated with a protective layer of gelcoat . Gelcoat forms a hard, smooth and durable surface .
Gelcoat contains microscopic pores that can, over time, collect dirt and discolor if the gelcoat is not kept clean .
CauTiON
DO nOt USE AbRASivE cLEAnERS WhEn WAShing thE yAcht. AbRASivE cLEAnERS ScRAtch AnD DULL thE
gELcOAt.
WASh thE yAcht With FRESh WAtER AFtER EAch OUting tO hELp kEEp thE gELcOAt cLEAn. iF thE yAcht iS
OpERAtED in SALt WAtER:
WASh At LEASt OncE EvERy WEEk, EvEn iF thE yAcht hASn’t bEEn USED SincE thE LASt WAShing. •
pERiODicALLy WASh With A SOLUtiOn OF FRESh WAtER AnD miLD SOAp. •
USE A SpOngE tO WASh SmOOth SURFAcES AnD A StiFF nyLOn OR nAtURAL bRiStLE bRUSh tO WASh •
nOnSkiD SURFAcES.
WarNiNg
DO nOt WAX thE nOnSkiD SURFAcES. WAXing mAkES thE nOnSkiD SURFAcES SLippERy AnD DAngEROUS tO
WALk On.
WAX ALL nOn-tREAD AREAS At LEASt OncE pER SEASOn. USE A high qUALity, nOn-yELLOWing, mARinE WAX.
WAXing pROviDES A Shiny SURFAcE AnD SEALS thE pORES in thE gELcOAt, mAking it EASiER tO kEEp cLEAn.
CauTiON
FREqUEnt AnD cOntinUED USE OF AbRASivE pOLiShing cOmpOUnDS, EvEntUALLy ERODES thE gELcOAt.