Marquis 500 Sport Bridge, Руководство пользователя

Страница: 67 / 124

Open the faucet at the base of the hose fitting to supply water to the hose . 4 .
NOTE: The Raw Water Wash Down System is an available option . The hose fittings are side-by-side and clearly marked .
A complete explanation of the raw water wash down is provided at the end of this section .
INTERNAL WASTE WATER PIPING SYSTEm: DRAINAGE BOxES
The discharge piping system varies slightly from Domestic (U .S .) to International models . The following illustrations identifies common
variations . The Drainage Boxes depicted below is standard on ALL models .
The PORT and STBD drainage boxes are mounted in the engine room .
s
Hore
w
ater
A shore water fitting enables the fresh water system to draw water from a land water
source while the yacht is docked . Shore water is not drawn from the onboard tank .
NOTE:
Connecting to shore water bypasses the onboard fresh water tank
and pressure water pump; water does not fill into the tank . The
deck plate labeled WATER is the only way to fill the fresh water tank .
Switch OFF the Pressure Water Pump circuit breaker, located on the
AC Distribution Panel (Salon) when connecting to shore water .
CauTiON
DO nOt LEAvE thE yAcht UnAttEnDED WhiLE cOnnEctED tO ShORE WA-
tER. WAtER mAy DEvELOp OnbOARD iF A WAtER LinE LEAkS.
connectIng to Shore water:
Locate the shore water fitting labeled SHORE WATER, 5 . located on the boarding
platform’s STBD transom aft locker .
Attach one end of a water hose to the shore water fitting .
6 .
Attach opposite end of the hose to the dock side water tap . 7 .
Close all sink and shower faucets . 8 .
Provide power to the circuit breakers for the Auto sump, located on the DC Control Center (Engine Room) . 9 .
TURN DOCK SIDE WATER TAP ON . 10 .
s
ea
w
ater
w
asHdowns
The optional bow and transom sea water washdowns is designed to use seawater to washdown and clean the yacht .
Water DEck pLAtE
ShORE WAtER Fitting
I
nternal
S
yStemS
I
nternal
S
yStemS