Marquis 500 Sport Bridge, Руководство пользователя

Страница: 45 / 124

SHORE POWER CONNECTION
Shore power connectIon proceSS:
STEp 1: Switch OFF the Water Heater circuit breaker on the AC Control Center, located next to the stairway in the salon .
Do not switch the breaker on again until the fresh water system has been filled, pressurized, and primed .
STEp 2:
Switch both Shore and Generator circuit breaker groups OFF on the AC Control Center .
STEp 3: Switch OFF the AC Main circuit breaker group(s), located in the port transom storage locker .
DaNgEr
ELEctRicAL ShOck RESULting in DEAth OR SERiOUS inJURy cAn incUR by USing A DAmAgED ShORE pOWER
cORD OR A cORD thAt iS nOt DESignED FOR itS pURpOSE. thE ShORE pOWER cORD mUSt bE in EXcELLEnt
cOnDitiOn With nO cUtS, nickS, OR AbRASiOnS in thE EXtERiOR pLAStic cOvER. thE cORD mUSt bE SpEciFi-
cALLy DESignED tO cOnnEct thE bOAt tO A ShORE pOWER SOURcE.
NOTE: Switch OFF the main circuit breakers before connecting to the
shore power to prevent arching and burning of the shore power cord
receptacles . Disconnecting will protect the electrical equipment
on board from rapid ON/OFF current connections, which may occur
during the connection process .
STEp 4: Locate the 50’ shore power cord . Connect the female end of the cord
to the boat’s shore power receptacle .
STEp 5: Connect the female end of the cord(s) to the yacht’s shore power
receptacles(s) . The receptacles(s) are located on the port transom . If
the optional forward shore power receptacle(s) are equipped, they are
located on the starboard forward side deck .
STEp 6: Secure the nonmetallic threaded locking ring to the boat’s shore power
receptacle . Securing, prevents the cord from being accidentally
disconnected, and prevents arcing due to a gap between the cord plug
and the receptacle .
DaNgEr
DO nOt hAng thE EnD OF thE ShORE pOWER cORD intO
thE WAtER. nEARby SWimmERS OR pASSEngERS cAn bE
kiLLED OR SERiOUSLy inJURED FROm thE SURROUnDing
ELEctRicAL FiELD.
STEp 7: Unthread the access cap and lift cap up . Pay out cord as needed
using the Cable Master Switch .
STEp 8: Switch the External Cord and Cablemaster circuit breaker OFF, installed
in the source box at the shore power station (Starboard Aft Locker
Location) .
ShORE pOWER cORD
Threaded Locking Ring
Ac mAin ciRcUit pAnEL:
Located in
Salon area
Ac mAin bREAkER gROUp
ShORE pOWER REcEptAcLE:
pORt tRAnSOm
AC E
lECtriCAl
S
yStEm
AC E
lECtriCAl
S
yStEm