Marquis 500 Sport Bridge, Руководство пользователя

Страница: 62 / 124

Switch the Air Conditioning System Water Pump circuit breaker to ON, located on the AC Control Center (Salon) . 8 .
Switch the desired Air Conditioning Unit circuit breakers ON . 9 .
Verify that seawater is pumping through the air conditioning units . The seawater exits through the discharge thru-hull fittings 10 .
on the side of the yacht .
Use the controls for each air conditioning unit to set the desired temperature . Refer to the OEM information for details on
11 .
operating the air conditioning controls .
f
resH
w
ater
s
Ystem
The fresh water system is divided between:
Two 80 gallon fresh water tanks •
One 11 gallon water heater (20 gallon is installed with sauna option) •
The water tanks are located in the engine room on the STBD and PORT side of the Engine Room . The water heater is located in the
STBD aft corner of the Engine Room .
NOTE : Thoroughly flush and sanitize the water system:
Before initial use •
At least once each season •
Before flushing the system, Marquis recommends seeing your local dealer •
Refer to Section 9: Engine Room for the location of the water tanks and water heater
FILLING ThE WATER TANK
The fresh water tank is filled through a deck fitting with a plate labeled WATER . The plate is located on the STDB side deck amid-
ships . See reference on next page .
NOTE : Thoroughly flush and sanitize the water system before initial use and at least once each season .
CauTiON
DO nOt OvERFiLL thE WAtER tAnk, nOR LEAvE thE FiLL hOSE UnAttEnDED WhiLE thE tAnk iS bEing FiLLED.
OvERFiLLing cOULD RUptURE thE tAnk.
NOTE : Supply only clean, fresh, water into the water tank . The tank is full when water is discharged from the water tank
vent . The vent is located in the hull, outboard of the WATER deck fitting .
(See next page for Freshwater Engineering Schematic)
I
nternal
S
yStemS
I
nternal
S
yStemS