Marquis 500 Sport Bridge, Руководство пользователя

Страница: 103 / 124

M
aintenance
M
aintenance
Allow 15 minutes between coats to dry, then sand with •
600 grit sandpaper .
Apply Poly Topcoat SC-4185 to patch: 3 to 4 coats with a paintbrush 5 .
Allow 15 minutes between coats . •
Let patch dry for at least 8 hours . 6 .
Level patch with a razor blade, then sand with 1200, 1500 and 2000 grit sandpaper, following buffing procedure on previous 7 .
page .
repaIrS for major damage that affect wood color
Remove all damaged areas, sand with 400 grit sandpaper until damage is gone . 1 .
Replace color to patched area: 2 .
Brush on color Triclad Water Base Stain 13-9810 3a .
Dab to blend out, be careful not to go outside the patching area (going outside may cause dark rings around the patch 3b .
area) .
Replace Poly Sealer TH-20: 3 to 4 coats with a paintbrush 3 .
Allow 15 minutes between coats •
Allow 2 hours to dry . •
Sand with 600 grit sandpaper . •
Replace Poly Topcoat SC-4185: 3 to 4 coats with a paintbrush: 4 .
Allow 15 minutes between coats •
Allow at least 8 hours to dry •
Level patch with a razor blade, then sand with 1200, 1500 and 200 grit sandpaper, following buffing procedure . 5 .
mATERIAL LIST
part number materIal
8103261 Triclad Water Base Stain 13-9810
8103203 Poly Topcoat SC-4185
8103210 Poly Sealer TH-20
8103213 Butyl Acetone
8103214 Polyurethane Sealer Spray Catalyst
8103211 Toner Catalyst TH-720
8103212 Topcoat Catalyst TH-2537
8697610 400 Grit Sanding Disk
8697229 600 Grit Sanding Disk
8697188 800 Grit Sanding Disk
8697618 1200 Grit Sanding Disk
8601218 1500 Grit Sanding Disk
8697496 15 Micron Polishing Disk
---- Burn in Balm from Mohawk
---- Burn Sticks from Mohawk
8601207 3M Extra Cut Compound (1st Buff)
8619411 3M Finesse It Final Finish Compound (Final Buff)
---- 3M Perfect It Buffing Pad #05737 (White Color)
---- 3M Perfect It Buffing Pad #05725 (Black/Grey Color)