37
Connection
Select the type of Internet connection you
type (7):
want to use. (Refer to last section for detailed
descriptions.)
Idle Time
Input the idle time out for the Internet
Out (8):
connection and refer to last section for details
.
When you finish with all settings, click OK (9). To go back to a
previous menu, click Back.
2-3-5 Setup procedure for L2TP xDSL
L2TP is another popular connection method for xDSL and other
Internet connection types, and all required setting items are the
same with the PPTP connection.
Like PPTP, there are two kinds of required settings. First, WAN
Interface Settings:
Select the manner in which you obtain an IP address from your
service provider: “Obtain an IP address automatically” (equal to
DHCP, refer to Cable Modem above) or “Use the following IP
address” (equal to static IP address, refer to PPPoE xDSL above).
WAN interface settings must be correctly set; otherwise, the
Internet connection will fail even if the PPTP settings are correct.
Contact your Internet service provider if unsure what to enter.
Содержание 525541
