93
Up to 20 MAC addresses can be assigned by using this function.
Click “2.4GHz Wireless” or “5GHz Wireless” on the left side of the
Web management interface, then click “Access Control.” The
following message will be displayed on your Web browser:
All allowed MAC addresses will be displayed in the MAC Address
Filtering Table (1).
Here are descriptions of every setup item:
Delete Selected
To delete a specific MAC address entry, check
(2):
the Select box of the MAC address you want to
delete, then click Delete Selected. (You can
select more than one MAC address.)
Delete All (3):
If you decide to delete all MAC addresses listed
here, click Delete All.
Enable
To enforce MAC address filtering, you need to
Access Control
check “Enable Wireless Access Control.” When
(4):
this item is unchecked, the wireless router will
not enforce MAC address filtering.
1
2
3
4
6
7
8
9
5
Содержание 525541
