Mallinckrodt INOMAX DSir Plus Скачать руководство пользователя страница 27

Страница: 27 / 206

Part No. 20717 Rev-01

2014-07

1-15

The INOmax DS

has an interface using infrared (IR) technology which allows the INOmax DS

communicate with the INOmeter

(which is mounted to each INOMAX cylinder). The INOmax DS

checks the

INOMAX cylinder for the correct expiration date and cylinder concentration. The INOmax DS

also transmits

a confirmed patient identifier to the

INOmeter on any open INOMAX cylinder.

The INOmax DS

cart (PN 10018) has a cover (see Figure 1-7, ) with an infrared transceiver mounted

directly above each INOMAX cylinder. When INOMAX cylinders are loaded, communication will take

place between the INOmax DS

and the INOmeter (see Figure 1-7, ) after the boot up phase of the

INOmax DS

is complete. A cylinder icon will be displayed on the main screen when an INOMAX cylinder is

recognized by the INOmax DS

(see “Loading INOMAX Cylinders onto the INOmax DS

Cart”, page 1-17).

Infrared Communication between the INOMAX Cylinders and

the INOmax DS

IR Communication Interference

The INOmax DS

transceiver is located under the cart cover and should be protected from outside IR

sources. The INOmax DS

cart was designed to protect the INOmeter from external light/IR energy sources.

The INOmax DS

transceiver transmits via a 30 degree transmission cone projecting towards the floor (see

dotted lines in Figure 1-7

). The specifications of the IR beam call for it to have a range of 20 cm (7.9 in). Based

on these specifications it sould not affect other devices in the vicinity of the INOmax DS

The INOmeter uses a lower energy source which results in a lower IR beam range than the INOmax DS

cart.

The INOmeter does not transmit IR signals unless it is mounted on the INOmax DS

cart.

If there is interference with the INOmax DS

/INOmeter communication, the cylinder icon on the user screen

will not be displayed and a “Cylinder Not Detected” alarm will activate if there is a set INOMAX dose.

If IR communication interference occurs, we recommend taking the following actions:
• Move the external IR source
• Move the INOmax DS

cart to reduce the external IR source in the area of the INOmeter

• Shield the INOmeter from the suspect IR source

If the actions listed above do not remedy this issue, the transport regulator/cap assembly (PN 10022) may

be utilized.

WARNING:

Loss of communication between the INOmax DS

and the INOmeter for more

than one hour will result in interruption of INOMAX delivery.

Caution:

Nothing should be placed between the INOmeter and the cart to which it is attached.

Caution:

A strong magnetic field could affect the ability of the

INOmeter to detect if the cylinder valve is

opened or closed. This may affect the ability of the INOmax DS

to detect the position (open

or closed) of the cylinder valve.

Содержание INOMAX DSir Plus















































































































































































































Результаты поиска

Содержание INOMAX DSir Plus

Отзывы:

Mallinckrodt INOMAX DSir Plus, Руководство по эксплуатации, Страница: 27 / 206

Результаты поиска

Содержание INOMAX DSir Plus

Отзывы: