manualshive.com logo in svg

Mallinckrodt INOMAX DSir Plus, Руководство по эксплуатации, Страница: 131 / 206

Поделиться
Скачать
Mallinckrodt INOMAX DSir Plus Скачать руководство пользователя страница 131

Part No. 20717  Rev-01

2014-07

5-1

5/ Alarms

General alarm information

A listing of alarm messages is provided at the end of 

this section. 
All alarms have audible tones and visual messages. 

In the event of a total power failure or a main 

alarm speaker failure, a secondary audible alarm 

circuit activates, providing a continuous buzzing 

tone that can not be silenced (see page 5-6, 

"Continuous Audible Tone").

Note: Status information will not be displayed 

during alarm conditions. Once the alarm 

clears the status information will be displayed.

High and low-priority alarms

The INOmax DS

IR

 has both high and low-alarm priorities. 

High-priority alarms are accompanied with a red 

flashing Alarm Silence button.

Low-priority alarm conditions will display a continuous 

yellow Alarm Silence button.
High and low-priority alarm messages are displayed 

in fields one and two (see Figure 5-1) with the most 

recent message shown in field one.

Field 2 is used for status information such as “Running 

on Battery” and “Patient Info. Incomplete”.

Frequency Description

Comment

High 

Priority

400 Hz

10-pulse group

Repeats after 10 sec. 

if not silenced.

Low  

Priority

400 Hz

1 pulse

Repeats after 40 sec. 

if not silenced.

The following table provides the audible alarm tone 

information for high and low-priority alarms.

Figure 5-2 Alarm Active Screen

1.  Alarm Silence Button

2.  Alarm Help Button

3.  Violated Monitored Value Limit

2

1

3

Alarm silencing

Pushing the Alarm Silence button 

will silence high-priority alarms for 

120 seconds (time will count down 

to zero). When a new alarm condition occurs, the 

audible alarm becomes active again.
A low-priority alarm event is permanently silenced 

when the Alarm Silence button is pressed. When a 

new low-alarm condition occurs, the audible alarm 

becomes active again.
Alarm messages remain displayed during the 

alarm silence period as long as the alarm condition 

is active.

Field 1

Field 2

To activate on-screen alarm help, press 

the Alarm Help Button next to the Alarm 

Silence button.

Caution:

•  Any alarm setpoint adjustments made will not be maintained when system power is cycled.
•  Default values will be used following a complete power loss (no AC main power and depleted 

battery).

Figure 5-1 Text Message Area Showing Fields 

one and two.

Содержание INOMAX DSir Plus















































































































































































































Отзывы:

Нет отзывов