manualshive.com logo in svg

Mallinckrodt INOMAX DSir Plus, Руководство по эксплуатации, Страница: 140 / 206

Поделиться
Скачать
Mallinckrodt INOMAX DSir Plus Скачать руководство пользователя страница 140

Part No. 20717  Rev-01

2014-07

5-10

High Priority Alarms

Alarm

Possible Cause

Recommended Action

8. Delivery Failure

a. Over-delivery of INOMAX.

-  (CALCULATED dose is 

>200% of set dose) AND 

(CALCULATED dose is 

> set dose + 10 PPM) for 

12 consecutive seconds, 

or

-  CALCULATED dose > 

100 for 12 seconds

INOMAX delivery has been interrupted. 

Manually ventilate patient with the INOblender 
 or
turn integrated pneumatic backup delivery ON 

(verify at least five L/min ventilator gas flow in 

patient circuit).

b. The internal NO flow sensor 

temperature or measured 

flow rate is out of range.

    Other internal error 

detected (a temporary 

internal communication 

error that has been 

detected).

If Delivery Failure Alarm Occurs:

1. Use one of the back-up INOMAX delivery 

options

2. Turn INOmax DS

IR

 to standby, then restart.

3. Once device is ready to restart therapy:
4. Turn integrated back up off (if used) and then 

set the INOMAX dose.

5. Confirm delivery and check alarms.

Contact Technical Support.

9. Delivery Stopped

a. MONITORED NO > 100 

ppm for at least 12 seconds 

(once MONITORED NO 

drops below 100 ppm for 12 

seconds, alarm will resolve 

and INOMAX delivery will 

restart).

INOMAX delivery has been interrupted. 

Manually ventilate patient with the INOblender 
 or
turn integrated pneumatic backup delivery ON 

(verify at least five L/min ventilator gas flow in 

patient circuit).

b. Drug past expiry date 

or drug concentration 

mismatch.

Replace INOMAX cylinder.

c. INOmeter may have failed.

Replace INOMAX cylinder.

d. INOMAX cylinder valve is 

closed.

Open INOMAX cylinder valve.

e. INOMAX cylinder is not 

detected.

Replace INOMAX cylinder.

Contact Technical Support.

Содержание INOMAX DSir Plus















































































































































































































Отзывы:

Нет отзывов