manualshive.com logo in svg

Mallinckrodt INOMAX DSir Plus, Руководство по эксплуатации, Страница: 146 / 206

Поделиться
Скачать
Mallinckrodt INOMAX DSir Plus Скачать руководство пользователя страница 146

Part No. 20717  Rev-01

2014-07

5-16

Indicators

Indicator

Possible Cause

Recommended Action

26. Battery Failure

a. Device cannot 

communicate with battery.

 Contact Technical Support.

27. Low Calibration

a. Low calibration in progress.
  A Low Calibration indicator 

will display in the alarm 

area of the screen during 

the low calibration.

No user action required. 

28. Monitor Alarm Delay 

Active

The Monitor Alarm Delay 

Active indicator will be 

displayed for two minutes:
a. Upon exit from the 

calibration screen (whether 

or not a calibration was 

actually performed)

No user action required.

b. Following a calibration

No user action required.

c. Following completion of an 

auto purge

Monitor alarms for O

2

, NO

2

, 

and NO will be inactive 

anytime the Monitor Alarm 

Delay Active indicator is 

displayed.
This delay only affects the 

monitor alarms, all other 

alarms remain active.

No user action required.

29. Patient Info Incomplete

a. Patient identifier has not 

been entered.

Enter patient identifier.

30. Running on Battery 

a. Device is operating on the 

battery.

1. Connect to AC main power source when 

available (check main power indicator).

2. Make sure the power cord is fully inserted 

into the Power Cord Inlet and that the power 

cord clamp is secure.

31. Set Dose is Zero,  

Please Close Cylinder     

Valve

a. The set dose has been set 

to zero and the INOMAX 

cylinder valve is still open.

Close the INOMAX cylinder valve and 

depressurize regulator.

Содержание INOMAX DSir Plus















































































































































































































Отзывы:

Нет отзывов