manualshive.com logo in svg

Mallinckrodt INOMAX DSir Plus, Руководство по эксплуатации, Страница: 21 / 206

Поделиться
Скачать
Mallinckrodt INOMAX DSir Plus Скачать руководство пользователя страница 21

Part No. 20717  Rev-01

2014-07

1-9

Figure 1-6 Settings Screen

1.  Return to Previous Level Button

2.  Monitor Area

3.  Display Brightness Button

4.  Time Adjust Button

1

2

3

7

5

6

8

4

5.  Software Revision

6.  Alarm Volume Button 

7.  Calculated Delivery Graph

8.  Circuit Flow Rate Graph

Settings Screen (third level)

•  The circuit flow graph, combined with 

calculated delivery graph, is a user level tool to 

ascertain NO delivery system limitations in the 

context of mechanical ventilation.

•  The circuit flow rate graph displays the 

real time peak and average flow rate in the 

breathing circuit over a 10 second time period, 

as measured by the injector module. The 

area in green represents the circuit flow range 

where the INOmax DS

IR

 system is rated to 

deliver NO from 1-80 ppm. (see maximum NO 

delivery graph page 1-25). Display graphic 

areas in yellow represents where some 

inaccuracy of NO delivery is to be expected.  

•  The calculated delivery graph displays the 

delivery subsystem calculated % error in NO 

delivery compared to the desired set dose 

over a 10 second time period. The green 

to yellow transition points are defined to be  

NO delivery error of +20% (over-delivery) 

to -20% (under-delivery) compared to the 

desired NO set dose. High set dose levels, 

high peak inspiratory flows and proportional 

NO flow control inaccuracies can contribute 

to the indicating arrow varying from the ideal 

midpoint.

Note: • If the NO dose is not set, both graphs 

will remain inactive.

• See page 1-25 for further explanation 

of maximum deliverable NO 

concentration.

Содержание INOMAX DSir Plus















































































































































































































Отзывы:

Нет отзывов