MakerBot Replicator Z18, Руководство пользователя

Страница: 54 / 66

TROUBLESHOOTING 54
PROBLEM SOLUTION
Can’t load filament into
the MakerBot Replicator
Smart Extruder. Try unloading and loading again. Hold the Smart
Extruder in place and try pushing the filament
through. Push hard; as long as you are holding the
Smart Extruder in place, pushing on the filament
will not damage it.
Can’t remove filament
from the Smart Extruder. Try running the filament load script and allowing
plastic to extrude for a few seconds. Then try
unloading again.
Filament won’t extrude
from the Smart Extruder. Try unloading and reloading the filament. You
may be able to avoid jams in the future by
allowing the Smart Extruder to cool
to 50° C
before turning off your MakerBot Replicator Z18.
Printed object is stuck to
the build plate. Remove the plastic top plate from your
MakerBot Replicator Z18 if you have not already
done so. If you are still not able to remove your
print from the build plate, try flexing the plastic
plate slightly.
PRINTING PROBLEMS